Kellermann Flasher relay R2, 12 Volt
(35,54 €) 185,18 L
VERIFICAȚI DISPONIBILITATEA MAGAZINULUI
Disponibilitatea magazinului
Ridicați produsul astăzi
Disponibil exclusiv pentru dumneavoastră timp de două zile
Testați în liniște produsul înainte de a-l cumpăra
Comandați produsul online și ridicați-l din magazin
FC-Moto Store
Aachener Str. 21-23
52146 Würselen
Program de lucru
Luni-Vineri 10.00 - 19.00
Sâmbătă 10.00 - 18.00
Ne amintim de dumneavoastră
Vă rugăm să introduceți adresa dvs. de e-mail pentru a vă putea informa imediat ce articolul va fi din nou disponibil în mărimea dorită.
Descriere
The classic among the flasher relays
Made in Germany
ECE-tested
Replaces the original 2-3 pole flasher relay
Prevents the flashing of the non-operated flashers
Load-independent
Switching capacity 0,5 - 85 Watt
Small dimensions 30 x 30 x 10 [mm] (L/B/H)
Suitable for turn signal switches
Suitable for 12 Volt on-board electrical systems
Price per piece
The load-independent Kellermann R 2 flasher relay is the universal problem solver for the use of LED and halogen turn signals. It replaces all original 2-3 pole flasher relays and ensures a constant and correct flashing frequency. The connection is simple. If, after a conversion to LED indicators, the indicators that are not actuated flash unintentionally, it is sufficient to connect the relay with a left and a right indicator to reliably eliminate this effect*. All necessary components for installation are included in the scope of delivery.
*If necessary, the hazard warning lights must be deactivated.
Made in Germany
ECE-tested
Replaces the original 2-3 pole flasher relay
Prevents the flashing of the non-operated flashers
Load-independent
Switching capacity 0,5 - 85 Watt
Small dimensions 30 x 30 x 10 [mm] (L/B/H)
Suitable for turn signal switches
Suitable for 12 Volt on-board electrical systems
Price per piece
The load-independent Kellermann R 2 flasher relay is the universal problem solver for the use of LED and halogen turn signals. It replaces all original 2-3 pole flasher relays and ensures a constant and correct flashing frequency. The connection is simple. If, after a conversion to LED indicators, the indicators that are not actuated flash unintentionally, it is sufficient to connect the relay with a left and a right indicator to reliably eliminate this effect*. All necessary components for installation are included in the scope of delivery.
*If necessary, the hazard warning lights must be deactivated.
