Kellermann Flasher relé R2, 12 Volt
328,06 kr
SJEKK TILGJENGELIGHET I BUTIKKEN
Tilgjengelighet i butikken
Hent produktet i dag
Reserveres eksklusivt for deg i to dager
God tid til å teste før du kjøper
Bestill produktet på nett, og hent det i butikken.
FC-Moto Store
Aachener Str. 21-23
52146 Würselen
Åpningstider
Man. til fre. kl. 10–19
Lørdag kl. 10–18
Vi sender deg en påminnelse
Skriv inn e-postadressen din, slik at vi kan varsle deg så snart varen er tilgjengelig igjen i ønsket størrelse.
Beskrivelse
The classic among the flasher relays
Made in Germany
ECE-tested
Replaces the original 2-3 pole flasher relay
Prevents the flashing of the non-operated flashers
Load-independent
Switching capacity 0,5 - 85 Watt
Small dimensions 30 x 30 x 10 [mm] (L/B/H)
Suitable for turn signal switches
Suitable for 12 Volt on-board electrical systems
Price per piece
The load-independent Kellermann R 2 flasher relay is the universal problem solver for the use of LED and halogen turn signals. It replaces all original 2-3 pole flasher relays and ensures a constant and correct flashing frequency. The connection is simple. If, after a conversion to LED indicators, the indicators that are not actuated flash unintentionally, it is sufficient to connect the relay with a left and a right indicator to reliably eliminate this effect*. All necessary components for installation are included in the scope of delivery.
*If necessary, the hazard warning lights must be deactivated.
Made in Germany
ECE-tested
Replaces the original 2-3 pole flasher relay
Prevents the flashing of the non-operated flashers
Load-independent
Switching capacity 0,5 - 85 Watt
Small dimensions 30 x 30 x 10 [mm] (L/B/H)
Suitable for turn signal switches
Suitable for 12 Volt on-board electrical systems
Price per piece
The load-independent Kellermann R 2 flasher relay is the universal problem solver for the use of LED and halogen turn signals. It replaces all original 2-3 pole flasher relays and ensures a constant and correct flashing frequency. The connection is simple. If, after a conversion to LED indicators, the indicators that are not actuated flash unintentionally, it is sufficient to connect the relay with a left and a right indicator to reliably eliminate this effect*. All necessary components for installation are included in the scope of delivery.
*If necessary, the hazard warning lights must be deactivated.
