motogadget mo.switch mini push button holder, 22mm
129,00 €
Spomnili vas bomo
Vnesite svoj e-naslov, da vas bomo lahko obvestili, ko bo izdelek ponovno na voljo v želeni velikosti.
Opis
motogadget mo.Switch Mini, 3 Push Button Fitting 22 mm, housing black / push button, silver
The mo.Switch Mini is a universal, small push button fitting for handlebars with 22 mm (7/8 inch) tube diameter in an attractive look.
Very small and narrow but very concise due to the elaborately manufactured contrast cut... The housing milled from the solid is first anodised and then milled over at the edges. 3 miniature pushbuttons with a defined pressure point are embedded in recesses which give the thumb the necessary orientation. The pushbuttons are protected against splash water and have a very robust design. The individual strands are also soldered ready for operation and cast in a watertight manner. Only one hole for the thin cable has to be drilled into the handlebar. With a cable length of two meters, there are sufficient reserves for installation.
The two halves of the case are screwed together with two stainless steel screws and fit on handlebars with 22 mm The case is also available polished. Then of course without the contrast look. If there is not enough space on the right handlebar side for a mo.Switch Mini due to a large throttle grip, two switch housings can also be mounted on the left handle. The six buttons and the symmetrical milling create a special eye-catcher.
The mo.Switch Mini with the mo.Grip aluminium grips or the rubber grips mo.Grip Soft as well as the handlebar end indicator mo.Blaze Disc and the rearview mirror mo.Rear forms a super stylish handlebar image. This modular and high quality handlebar-farmature-indicator system adorns the Cafe-Racer as well as any other handlebar.
In combination with an electronic push-button control (NOT SUPPLY!) these beautiful CNC-manufactured fittings can switch all electrical units such as lights, indicators, electric starters, horn and much more.
Dimensions:
Inside diameter: 22 mm
Outside diameter: 45 mm
Width: 14 mm
Scope of supply:1 piece contains
1 x mo.Switch Mini Aluminiumo.housing
3 x integrated high-quality push-button per unit
1 x fixing screw made of stainless steel M5
1 x connecting cable 200 cm
The mo.Switch Mini is a universal, small push button fitting for handlebars with 22 mm (7/8 inch) tube diameter in an attractive look.
Very small and narrow but very concise due to the elaborately manufactured contrast cut... The housing milled from the solid is first anodised and then milled over at the edges. 3 miniature pushbuttons with a defined pressure point are embedded in recesses which give the thumb the necessary orientation. The pushbuttons are protected against splash water and have a very robust design. The individual strands are also soldered ready for operation and cast in a watertight manner. Only one hole for the thin cable has to be drilled into the handlebar. With a cable length of two meters, there are sufficient reserves for installation.
The two halves of the case are screwed together with two stainless steel screws and fit on handlebars with 22 mm The case is also available polished. Then of course without the contrast look. If there is not enough space on the right handlebar side for a mo.Switch Mini due to a large throttle grip, two switch housings can also be mounted on the left handle. The six buttons and the symmetrical milling create a special eye-catcher.
The mo.Switch Mini with the mo.Grip aluminium grips or the rubber grips mo.Grip Soft as well as the handlebar end indicator mo.Blaze Disc and the rearview mirror mo.Rear forms a super stylish handlebar image. This modular and high quality handlebar-farmature-indicator system adorns the Cafe-Racer as well as any other handlebar.
In combination with an electronic push-button control (NOT SUPPLY!) these beautiful CNC-manufactured fittings can switch all electrical units such as lights, indicators, electric starters, horn and much more.
Dimensions:
Inside diameter: 22 mm
Outside diameter: 45 mm
Width: 14 mm
Scope of supply:1 piece contains
1 x mo.Switch Mini Aluminiumo.housing
3 x integrated high-quality push-button per unit
1 x fixing screw made of stainless steel M5
1 x connecting cable 200 cm
| Navodila za montažo: | Prenesi |
| Usmrtitev: | 7/8 palca |
|---|
