HIGHSIDER pro distance block set 25mm, black
39,95 €
Spomnili vas bomo
Vnesite svoj e-naslov, da vas bomo lahko obvestili, ko bo izdelek ponovno na voljo v želeni velikosti.
Opis
Clamp block increase +25 mm for 22 mm handlebars with ABE
The CNC-milled aluminum spacers increase the handlebar position. They are simply installed in the standard handlebar clamp.
You can find the right bolt length for your bike using our bike finder or by measuring the length of the original bolt used and adding 25 mm.
Material: aluminium
Material treatment: anodized
Fastening: Between clamping block and handlebar, lifting 25mm
Diameter: for handlebars with a Ø of 22.2mm in the clamping area
Pitch: 32-35mm
Screws: 4 x M8 x 55 / 4 x M8 x 60
Attention:
Please check whether your vehicle is listed in the ABE. This article is only registration-free if your motorcycle is assigned to the RE25 clamp in the enclosed ABE and all requirements are observed.
For vehicles that are not listed in the model list, an approval by means of an acceptance test in accordance with. § 19(2) StVZO possible.
The CNC-milled aluminum spacers increase the handlebar position. They are simply installed in the standard handlebar clamp.
You can find the right bolt length for your bike using our bike finder or by measuring the length of the original bolt used and adding 25 mm.
Material: aluminium
Material treatment: anodized
Fastening: Between clamping block and handlebar, lifting 25mm
Diameter: for handlebars with a Ø of 22.2mm in the clamping area
Pitch: 32-35mm
Screws: 4 x M8 x 55 / 4 x M8 x 60
Attention:
Please check whether your vehicle is listed in the ABE. This article is only registration-free if your motorcycle is assigned to the RE25 clamp in the enclosed ABE and all requirements are observed.
For vehicles that are not listed in the model list, an approval by means of an acceptance test in accordance with. § 19(2) StVZO possible.
| Navodila za montažo: | Prenesi |
| ABE: | Prenesi |
| Barva: | črna |
|---|---|
| Komplet za dvig: | - 25 mm |