HIGHSIDER CONERO handlebar end mirror with LED turn signal
99,95 €
Spomnili vas bomo
Vnesite svoj e-naslov, da vas bomo lahko obvestili, ko bo izdelek ponovno na voljo v želeni velikosti.
Opis
HIGHSIDER CONERO handlebar end mirror with LED turn signal in mirror arm, E-approved
Functionality combined with great looks - handlebar end mirror with integrated LED turn signal in mirror arm. Noble, black anodized head made of aluminum. Suitable for handlebars with an inner diameter of 12 to 22 mm, i.e. for most 7/8-inch and 1-inch aluminium or steel handlebars. Can be used for the left and right side.
Our HIGHSIDER CONERO series lives from a minimalist design and fits perfectly to undisguised motorcycles. The shapely and high-quality machined add-on parts made of aluminium give your roadster face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and living.
This LED handlebar end mirror is attached with our newly developed HIGHSIDER clamping system.
Advantages: Easier installation and routing of the cables, as well as easier adjustment of the turn signal or the mirror.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A width head: 102 mm
B height head: 102 mm
C total width: 65 mm
D total height: 190 mm
Width mirror arm: 12 mm
Stem length: 70 mm from head to 1 bend, then 55 mm to 2 bend and 30 mm to end of stem.
Weight: 290 g
Scope of delivery: 1 piece, including mounting kit
Tip:
A mounting tutorial is available on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v=FfqiOz3U9Wk
Notes:
This rear view mirror is only suitable for hanging mounting!
It must always be installed 2 pieces, because turn signals are integrated. These replace your OLD turn signals.
To close any holes for mounting the original handlebar mirrors, please use the HIGHSIDER sealing caps.
Functionality combined with great looks - handlebar end mirror with integrated LED turn signal in mirror arm. Noble, black anodized head made of aluminum. Suitable for handlebars with an inner diameter of 12 to 22 mm, i.e. for most 7/8-inch and 1-inch aluminium or steel handlebars. Can be used for the left and right side.
Our HIGHSIDER CONERO series lives from a minimalist design and fits perfectly to undisguised motorcycles. The shapely and high-quality machined add-on parts made of aluminium give your roadster face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and living.
This LED handlebar end mirror is attached with our newly developed HIGHSIDER clamping system.
Advantages: Easier installation and routing of the cables, as well as easier adjustment of the turn signal or the mirror.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A width head: 102 mm
B height head: 102 mm
C total width: 65 mm
D total height: 190 mm
Width mirror arm: 12 mm
Stem length: 70 mm from head to 1 bend, then 55 mm to 2 bend and 30 mm to end of stem.
Weight: 290 g
Scope of delivery: 1 piece, including mounting kit
Tip:
A mounting tutorial is available on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v=FfqiOz3U9Wk
Notes:
This rear view mirror is only suitable for hanging mounting!
It must always be installed 2 pieces, because turn signals are integrated. These replace your OLD turn signals.
To close any holes for mounting the original handlebar mirrors, please use the HIGHSIDER sealing caps.
| Navodila za montažo: | Prenesi |
| Barva: | črna |
|---|---|
| Usmrtitev: | S smernikom |
Sorodni izdelki
Dopolnilni izdelki
Alternative products
