HIGHSIDER MONTANA RIM styre endespeil med LED-blinklys
876,65 kr
Vi sender deg en påminnelse
Skriv inn e-postadressen din, slik at vi kan varsle deg så snart varen er tilgjengelig igjen i ønsket størrelse.
Beskrivelse
HIGHSIDER MONTANA RIM handlebar end mirror with integrated LED turn signal in the mirror arm, E-approved
- Here functionality meets an outstanding look -
Improve the proven without changing the character of the mirror. This was the motto of the creative team at Highsider. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with its predecessor, the mirror is made of high-quality materials that are perfectly finished as usual.
The new details of the refreshed product only become apparent at second glance. The - bar end system - has been given a more distinctive design and is optionally expandable with the Design Cap1 from the same company for an even more individual appearance. The revised mirror arm design with fully recessed turn signal now stands even more confidently in the wind. The matt black anodised aluminium, finely bead-blasted, emphasises the high-quality look.
In the technology, the developers also relied on evolution and spend a strong clamping function and adjustability for the mirror arm with integrated LED lighting. With 4 easy-to-reach black screws, the direction indicator can be aligned for a wide range of handlebar types in compliance with ECE. Fits modern motorcycles with an inner handlebar diameter of 12-22 mm, i.e. most 7/8 and 1 inch alloy or steel handlebars. Can be used on both the left and right. The handlebar end mirrors with LED turn signals are mounted in pairs. Make sure that the direction indicators are oriented parallel to the vehicle in the direction of travel and forward to the ground so that the illumination is ECE-compliant. Mirrors and indicators are E-approved, there is no entry in the vehicle documents or carry any documents necessary.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A/B Ø mirror head: 102 mm
C Width: 60 mm
D Height: 200 mm
Connections:
Black cable (-)
Yellow cable (+)
Cable length: 1000 mm
Scope of delivery: 1 piece
Tip:
- To close any holes for mounting the original handlebar mirrors use the HIGHSIDER caps.
- Option HIGHSIDER DESIGN Cap1 to mount, for even more individual appearance. (Not included)
Notes:
- Only suitable for hanging installation.
- It must always be installed 2 mirrors, because turn signals are integrated.
- Here functionality meets an outstanding look -
Improve the proven without changing the character of the mirror. This was the motto of the creative team at Highsider. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with its predecessor, the mirror is made of high-quality materials that are perfectly finished as usual.
The new details of the refreshed product only become apparent at second glance. The - bar end system - has been given a more distinctive design and is optionally expandable with the Design Cap1 from the same company for an even more individual appearance. The revised mirror arm design with fully recessed turn signal now stands even more confidently in the wind. The matt black anodised aluminium, finely bead-blasted, emphasises the high-quality look.
In the technology, the developers also relied on evolution and spend a strong clamping function and adjustability for the mirror arm with integrated LED lighting. With 4 easy-to-reach black screws, the direction indicator can be aligned for a wide range of handlebar types in compliance with ECE. Fits modern motorcycles with an inner handlebar diameter of 12-22 mm, i.e. most 7/8 and 1 inch alloy or steel handlebars. Can be used on both the left and right. The handlebar end mirrors with LED turn signals are mounted in pairs. Make sure that the direction indicators are oriented parallel to the vehicle in the direction of travel and forward to the ground so that the illumination is ECE-compliant. Mirrors and indicators are E-approved, there is no entry in the vehicle documents or carry any documents necessary.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A/B Ø mirror head: 102 mm
C Width: 60 mm
D Height: 200 mm
Connections:
Black cable (-)
Yellow cable (+)
Cable length: 1000 mm
Scope of delivery: 1 piece
Tip:
- To close any holes for mounting the original handlebar mirrors use the HIGHSIDER caps.
- Option HIGHSIDER DESIGN Cap1 to mount, for even more individual appearance. (Not included)
Notes:
- Only suitable for hanging installation.
- It must always be installed 2 mirrors, because turn signals are integrated.
| Monteringsanvisning: | Last ned |
| Farge: | Svart |
|---|
Relaterte produkter
Supplerende produkter
Alternative produkter
