kr 551,24
Vi sender deg en påminnelse
Skriv inn e-postadressen din, slik at vi kan varsle deg så snart varen er tilgjengelig igjen i ønsket størrelse.
Beskrivelse
HIGHSIDER MONTANA-BLAST handlebar end mirror, short, surface fine bead blasted in black satin, E-approved.
Handlebar end mirrors give motorcycles a very special look. If NORMAL mirrors are just too unspectacular for you, you will find the solution in the HIGHSIDER handlebar end mirror range. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with its predecessor, the mirror is made of high-quality materials that are perfectly finished as usual. The matt black anodised aluminium, finely bead-blasted, emphasises the high-quality look. Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be used for left and right side. Mirror can be mounted on the right and left side as well as standing up or hanging down. A joint on the clamp gives the short version additional adjustment options for better visibility. The mirror head can be directed inwards or outwards with an Allen key. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle.
Accessory tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer needed, can be covered with this in an attractive way.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A/B: 102 mm
C: 150 mm, stem length center - center: 65 mm
D: 100 mm
Weight: 172 g
Scope of delivery: 1 piece.
Handlebar end mirrors give motorcycles a very special look. If NORMAL mirrors are just too unspectacular for you, you will find the solution in the HIGHSIDER handlebar end mirror range. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with its predecessor, the mirror is made of high-quality materials that are perfectly finished as usual. The matt black anodised aluminium, finely bead-blasted, emphasises the high-quality look. Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be used for left and right side. Mirror can be mounted on the right and left side as well as standing up or hanging down. A joint on the clamp gives the short version additional adjustment options for better visibility. The mirror head can be directed inwards or outwards with an Allen key. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle.
Accessory tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer needed, can be covered with this in an attractive way.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A/B: 102 mm
C: 150 mm, stem length center - center: 65 mm
D: 100 mm
Weight: 172 g
Scope of delivery: 1 piece.
| Farge: | svart perleblåst |
|---|---|
| Henrettelse: | For 7/8 og 1 tommers styre |
Relaterte produkter
Supplerende produkter
Alternative produkter
