Name: Revit Micah TF Motociklu džinsi
Brand: Revit
SKU: 1214016931
Price: 224.74 EUR
Availability: InStock
Rating: 2.0 (1 reviews)

Apraksts

Revit Micah TF motociklu džinsi

Izstrādāt modernu un ērtu džinsu pāri augstākajā AAA līmenī nebija viegli, taču Revit nevairās no izaicinājumiem un iepazīstina ar Micah TF džinsiem. Ar PWR|Vairoga stiprinājumi uz gurniem, sēdekļiem un ceļgaliem, kā arī SEESMART aizsargi uz gurniem un ceļgaliem, Revit sasniedza augstāko AAA klasi IAL šajā produktu grupā. Micah TF džinsi ar konusveida piegulumu (plati augšstilbos, sašaurinās uz leju) ir izgatavoti no izturīga, bet elastīga 16 oz. CORDURA džinsa®. Tas nodrošina maksimālu kustību brīvību neatkarīgi no tā, vai atrodaties uz stūres vai ceļā uz savu iecienītāko Hangout.

Iespējas:

Ārējais audums: 16oz Cordura džinss®
Jostas cilpas
Aizvēršana ar pogu
5 kabatas

Specifikācijas:

Aizsargapģērbs motociklistiem, AA aizsardzības klase (EN 17092-2:2020)
SEESMART gūžas aizsargi 1. līmenis (iekļauts)
SEESMART ceļgalu aizsargi 1. līmenis (iekļauts)
Divslāņu PWR|Vairogs uz sēdekļa, ceļgaliem un gurniem
Trīskāršas drošības šuves
Pārdomas uz apakšmalas aproces

ES atbilstības deklarācija:

Lejupielādēt

Izmērs:	36/34
Bikšu tips:	Bikses
Funkcijas:	Komplektā iekļauti ceļgalu aizsargi
Dzimums:	Vīrieši
Materiāls:	Tekstils
Piemērošanas joma:	Klasisks / smalcinātājs, Pilsēta
Aizsardzības klase (sertifikācija):	Aizsardzības klase AAA
Materiāla sastāvs:	50% kokvilna, 30% poliesters, 20% poliamīds

Rādīt vairāk Show less

Novērtējumi

1 no 1 atsauksmēm

Novērtējiet šo produktu!

Dalieties savā pieredzē ar citiem klientiem.

Pieteikties

Jūsu e-pasta adrese

Jūsu parole

Rādīt vērtējumus tikai pašreizējā valodā.

Kārtots pēc

1 atsauksme

2026. gada 27. maijs 17:04

Nice jeans but could be better. Mine had an issue on the hip pocket

Positive aspects: a) Colour and finish — Nice colour overall, even though I would have preferred a non‑“used” black tone. b) Weight — They feel relatively heavy, which I actually see as a good sign, suggesting solid construction and substantial material. c) Interior construction — Partial mesh lining inside. d) Reinforcement — Double layer of PWR Shield at the seat, hips, and knees; as far as I know, it’s the only model in the Rev’It jeans range that includes this. e) Protection level — Class AAA, with Level 1 protectors on hips and knees included (although I would have preferred Level 2). f) Boot compatibility — Despite the tapered fit, I was able to wear them over my tall road boots. The look wasn’t ideal because they were quite tight around the boot area, but I must acknowledge that they did fit over them. Negative aspects: a) Manufacturing origin — Made in the United Arab Emirates, which is always the same disappointing story of not being produced in Europe. b) Used-effect wear — The “used” finishing process seems to have slightly degraded the outer shell. c) Perceived quality in hand — In hand, they don’t feel particularly premium: too many interior and exterior stitching lines waiting to be trimmed, and some panels appear slightly misaligned. d) Fit and cut — The design is overly tapered. I consider my legs and waist fairly regular, yet the taper is excessive while the upper area has too much spare fabric. Dressing and undressing them is unnecessarily difficult due to the lack of a regular fit. e) Hip protector issue — The worst flaw (and truly unacceptable): one hip protector was dramatically twisted. At first, I assumed it was poorly installed, but then I discovered the real problem — a belt loop had been stitched directly onto the protector pocket, leaving no space for the protector to sit correctly. Very poor quality control. Personal conclusion: Because of all this, I ultimately switched to the black Lombard model with its regular fit — even though I’ll miss the PWR Shield at the seat, hips, and knees, the extra “A” rating, and the additional ounce of Cordura denim.

Revit Micah TF Motociklu džinsi

Saistītie produkti

Papildprodukti

Novērtējumi