motogadget mo.switch switch armature, For 1 inch handlebars
99,00 €
Mēs jums atgādinām
Lūdzu, ievadiet savu e-pasta adresi, lai mēs varētu jūs informēt, tiklīdz prece būs pieejama vēlamajā izmērā.
Apraksts
The mo.Switch is a universal, high-quality push button fitting for handlebars with 1 inch tube diameter in a simple, elegant design.
In combination with an electronic push-button control (NOT SUPPLY!) these beautiful CNC-manufactured fittings can switch all electrical units such as lights, turn signals, electric starters, horn and much more.
CNC-milled from billet aluminum, the housing is available in high gloss polished finish or high gloss black anodized. The compact housing allows two or more units to be mounted on one handlebar. The two or three push-buttons per unit, in black or stainless steel/VA, can be freely combined with the housing to match or contrast.
Two recessed M5 stainless steel fixing screws (one screw for 3 push-button unit) clamp the push-button control securely and stably to each handlebar. The buttons are of high quality, very robust and protected against vibrations and splash water (IP65).
Adequate size and ergonomic pressure point (light, mechanical detent) ensure a safe shifting feeling during operation - even when operating with a glove. This feedback lets you know immediately what you are doing without having to check the switching process every time.
Thanks to two connections per push-button, single-wire or two-wire wiring is easily possible. A connection for ground is already provided internally for single-wire wiring. A cable routing in the handlebar is therefore easy to carry out. In case of possible damage, the push-buttons are available individually and can be replaced. The mo.Switch is of course compatible with all common push button controls such as the mo.Unit.
In combination with an electronic push-button control (NOT SUPPLY!) these beautiful CNC-manufactured fittings can switch all electrical units such as lights, turn signals, electric starters, horn and much more.
CNC-milled from billet aluminum, the housing is available in high gloss polished finish or high gloss black anodized. The compact housing allows two or more units to be mounted on one handlebar. The two or three push-buttons per unit, in black or stainless steel/VA, can be freely combined with the housing to match or contrast.
Two recessed M5 stainless steel fixing screws (one screw for 3 push-button unit) clamp the push-button control securely and stably to each handlebar. The buttons are of high quality, very robust and protected against vibrations and splash water (IP65).
Adequate size and ergonomic pressure point (light, mechanical detent) ensure a safe shifting feeling during operation - even when operating with a glove. This feedback lets you know immediately what you are doing without having to check the switching process every time.
Thanks to two connections per push-button, single-wire or two-wire wiring is easily possible. A connection for ground is already provided internally for single-wire wiring. A cable routing in the handlebar is therefore easy to carry out. In case of possible damage, the push-buttons are available individually and can be replaced. The mo.Switch is of course compatible with all common push button controls such as the mo.Unit.
| Montāžas instrukcija: | Lejupielādēt |
| Izpilde: | 7/8 collas |
|---|
