HIGHSIDER MONTANA-SLIM handlebar end mirror
28 538 Ft
Értesítünk
Add meg az e-mail-címedet, hogy értesíthessünk, amint a termék újra elérhető lesz a kívánt méretben.
Leírás
HIGHSIDER MONTANA-SLIM handlebar end mirror, short, E-approved
Now take a look at the HIGHSIDER MONTANA-SLIM handlebar end mirror. Incredible how slim the mirror body is. Without ball mounting only approx. 5 mm thin. The mirror body, mirror arm and the clamping are made of aluminium. The silk matt surface underlines the valuable look. The result is a motorcycle rear view mirror that looks sensational and is perfectly finished as usual.
Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle. The mirror can be mounted on the right and left as well as standing up or hanging down. The precise ball joint enables the comfortable and very stable adjustment of the mirror.
Accessory Tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer needed, can be covered with this in an attractive way.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A/B: BHead: 100 mm
C: Total width: 183 mm
D: Total height: 156 mm
Stem length: 140 mm
Weight: 159 g
Scope of delivery: 1 piece
1 X adapter 1 inch
1 X adapter 7/8 inch
Now take a look at the HIGHSIDER MONTANA-SLIM handlebar end mirror. Incredible how slim the mirror body is. Without ball mounting only approx. 5 mm thin. The mirror body, mirror arm and the clamping are made of aluminium. The silk matt surface underlines the valuable look. The result is a motorcycle rear view mirror that looks sensational and is perfectly finished as usual.
Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle. The mirror can be mounted on the right and left as well as standing up or hanging down. The precise ball joint enables the comfortable and very stable adjustment of the mirror.
Accessory Tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer needed, can be covered with this in an attractive way.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.
Dimensions:
A/B: BHead: 100 mm
C: Total width: 183 mm
D: Total height: 156 mm
Stem length: 140 mm
Weight: 159 g
Scope of delivery: 1 piece
1 X adapter 1 inch
1 X adapter 7/8 inch
| Szín: | fekete |
|---|---|
| Kivégzés: | Hosszú verzió |
Kapcsolódó termékek
Kiegészítő termékek
Alternative products
