19 019 Ft
Értesítünk
Add meg az e-mail-címedet, hogy értesíthessünk, amint a termék újra elérhető lesz a kívánt méretben.
Leírás
HIGHSIDER TETRA handlebar end mirror, long, bead-blasted black satin finish, E-approved
- My rear-view mirror, it has three corners ... -
In the shape of a triangle, the HIGHSIDER TETRA handlebar end mirror scores with its cheeky design and creates variety. With this unusual handlebar end mirror you can design your bike in detail according to your ideas. It underlines your style, looks modern and individual at the same time.
The rearview mirror housing and stem are made of aluminum, the fine bead blasted surface satin finish. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. Additional adjustment possibilities due to a joint on the clamp. The mirror head can be turned inwards or outwards for a better view using an Allen key. Suitable for 1 and 7/8 inch steering tube diameters, i.e. for most aluminium and steel handlebars. The handlebar end mirror can be mounted on the right or left as well as standing up or hanging down. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle.
Our accessories TIP:
Excellent in combination with the matching HIGHSIDER TETRA handlebar weights with handlebar end mirror mount.
Dimensions:
A Width head: 108 mm
B Height head: 122.5 mm
C Total width: 28.5 mm
D Total height: 18.5 mm
Stem length: 76 mm
Weight: 226 g
Scope of delivery: 1 piece incl. 7/8 and 1 inch adapters.
- My rear-view mirror, it has three corners ... -
In the shape of a triangle, the HIGHSIDER TETRA handlebar end mirror scores with its cheeky design and creates variety. With this unusual handlebar end mirror you can design your bike in detail according to your ideas. It underlines your style, looks modern and individual at the same time.
The rearview mirror housing and stem are made of aluminum, the fine bead blasted surface satin finish. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. Additional adjustment possibilities due to a joint on the clamp. The mirror head can be turned inwards or outwards for a better view using an Allen key. Suitable for 1 and 7/8 inch steering tube diameters, i.e. for most aluminium and steel handlebars. The handlebar end mirror can be mounted on the right or left as well as standing up or hanging down. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle.
Our accessories TIP:
Excellent in combination with the matching HIGHSIDER TETRA handlebar weights with handlebar end mirror mount.
Dimensions:
A Width head: 108 mm
B Height head: 122.5 mm
C Total width: 28.5 mm
D Total height: 18.5 mm
Stem length: 76 mm
Weight: 226 g
Scope of delivery: 1 piece incl. 7/8 and 1 inch adapters.
| Szín: | Fekete szatén matt |
|---|---|
| Kivégzés: | Rövid változat |
Kiegészítő termékek
Alternative products
