HIGHSIDER ROCKET LED turn signal unit
89,95 €
Podsjetit ćemo vas
Unesite svoju adresu e-pošte kako bismo vas mogli obavijestiti čim artikl ponovno bude dostupan u željenoj veličini.
Opis
HIGHSIDER ROCKET LED turn signal - suitable for mounting or installation - with black aluminium ring and tinted glass. E-approved for front and rear.
In this innovative lighting technology, 6 very bright SMD LEDs are installed in the center, which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs. This combination comes with a black anodized aluminum ring that fits over the base body.
In the right direction - with the innovative turn signal series from HIGHSIDER. Don't just show where you're going, show who you are.
This is trend-setting design at its finest.
Dimensions
A1: 18 mm
A2: 15 mm
D1: 45 mm
D2: 43 mm
Fixing bolt: M8 x 1.25 mm, length: 18 mm
Connections:
Black cable = ground (-)
Yellow cable = turn signal (+)
Scope of delivery: 1 pair
Further accessories from the HIGHSIDER CLASSIC series, see tab - WE ALSO RECOMMEND - or - ACCESSORIES -.
Note:
The combination can be installed flat without an aluminium ring, so that only the lens is visible. A 40 mm hole must be drilled for this purpose.
Alternatively, the combination with the aluminum ring can be mounted on e.g. a retaining plate on the vehicle.
In this innovative lighting technology, 6 very bright SMD LEDs are installed in the center, which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs. This combination comes with a black anodized aluminum ring that fits over the base body.
In the right direction - with the innovative turn signal series from HIGHSIDER. Don't just show where you're going, show who you are.
This is trend-setting design at its finest.
Dimensions
A1: 18 mm
A2: 15 mm
D1: 45 mm
D2: 43 mm
Fixing bolt: M8 x 1.25 mm, length: 18 mm
Connections:
Black cable = ground (-)
Yellow cable = turn signal (+)
Scope of delivery: 1 pair
Further accessories from the HIGHSIDER CLASSIC series, see tab - WE ALSO RECOMMEND - or - ACCESSORIES -.
Note:
The combination can be installed flat without an aluminium ring, so that only the lens is visible. A 40 mm hole must be drilled for this purpose.
Alternatively, the combination with the aluminum ring can be mounted on e.g. a retaining plate on the vehicle.
| Boja: | crna |
|---|---|
| Pogubljenje: | Pokazivači smjera |
| Promjer: | 45.00 |
| Promjer navoja: | M8 |
| Staklo: | Tonirani |
Povezani proizvodi
Dopunski proizvodi
Alternative products
