HIGHSIDER MONTANA-BLAST EVO handlebar end mirror
59,95 €
Podsjetit ćemo vas
Unesite svoju adresu e-pošte kako bismo vas mogli obavijestiti čim artikl ponovno bude dostupan u željenoj veličini.
Opis
HIGHSIDER MONTANA-BLAST EVO handlebar end mirror, E-tested
- Surface fine bead blasted black satin -
handlebar end mirrors give motorcycles a very special look. For those who find NORMAL mirrors simply too unspectacular, the HIGHSIDER handlebar end mirror range offers the solution. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with its predecessor, the mirror is made of high-quality materials and a uniformly curved stem. Perfectly finished as usual. The matte black anodized aluminum, finely bead blasted, emphasizes the valuable look. Fits handlebars with a handlebar inner diameter of 12 to 22 mm, ie for most 7/8-inch and 1-inch aluminum or steel handlebars. Can be used for left and right side. Mirror can be mounted on the right and left, as well as standing up or hanging down.
Accessory Tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer required, can be covered with this in an attractive manner.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. That is prudence in perfection.
Dimensions:
A/B Ø head: 102 mm
C Total width: 56 mm
D Total height: 190 mm
Stem length approx 130 mm
Central screw M6 x 1.0 mm Allen screw
Scope of supply: 1 piece, including mounting kit and universal clamping system.
- Surface fine bead blasted black satin -
handlebar end mirrors give motorcycles a very special look. For those who find NORMAL mirrors simply too unspectacular, the HIGHSIDER handlebar end mirror range offers the solution. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with its predecessor, the mirror is made of high-quality materials and a uniformly curved stem. Perfectly finished as usual. The matte black anodized aluminum, finely bead blasted, emphasizes the valuable look. Fits handlebars with a handlebar inner diameter of 12 to 22 mm, ie for most 7/8-inch and 1-inch aluminum or steel handlebars. Can be used for left and right side. Mirror can be mounted on the right and left, as well as standing up or hanging down.
Accessory Tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer required, can be covered with this in an attractive manner.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. That is prudence in perfection.
Dimensions:
A/B Ø head: 102 mm
C Total width: 56 mm
D Total height: 190 mm
Stem length approx 130 mm
Central screw M6 x 1.0 mm Allen screw
Scope of supply: 1 piece, including mounting kit and universal clamping system.
| Boja: | crni perlastirani |
|---|---|
| Pogubljenje: | Za upravljače od 7/8 i 1 inča |
Povezani proizvodi
Alternative products
