motogadget mo.Switch 2 push button fitting 22mm, black/VA
89,00 €
Θα σας αποστείλουμε υπενθύμιση
Εισαγάγετε τη διεύθυνση email σας, ώστε να μπορούμε να σας αποστείλουμε υπενθύμιση μόλις το προϊόν είναι ξανά διαθέσιμο στο επιθυμητό μέγεθος.
Περιγραφή
motogadget mo.Switch, 2 Push Button Fitting 22mm, housing black, push buttons VA
The mo.Switch is a universal, high quality push button fitting for handlebars with 22 mm (7/8 inch) tube diameter in a simple, elegant design.
In combination with an electronic push button control (NOT SUPPLIED!).), these beautiful CNC-manufactured fittings can switch all electrical units such as lights, turn signals, electric starters, horns and much more.
CNC-milled from billet aluminum, the housing is available in high gloss polished finish or bright black anodized. The compact housing allows two or more units to be mounted on one handlebar. The buttons are of high quality, very robust and protected against vibrations and splash water (IP65). Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe shifting feeling during operation - even when operating with a glove. This feedback lets you know immediately what you are doing without having to check the switching process every time.
Thanks to two connections per push-button, single-wire or two-wire wiring is easily possible. A connection for ground is already provided internally for single-wire wiring. A cable routing in the handlebar is therefore easy to carry out. In case of possible damage, the buttons are available individually and can be replaced.
The mo.Switch is of course compatible with all common button controls such as the mo.Unit.
Dimensions:
Inside diameter: 22mm
Outside diameter: approx. 49mm
Width: 20,5mm
Scope of supply:
mo.Switch Aluminiumo.housing
2 high-quality push-buttons per unit
Stainless steel mounting screws M5
Installation instructions
The mo.Switch is a universal, high quality push button fitting for handlebars with 22 mm (7/8 inch) tube diameter in a simple, elegant design.
In combination with an electronic push button control (NOT SUPPLIED!).), these beautiful CNC-manufactured fittings can switch all electrical units such as lights, turn signals, electric starters, horns and much more.
CNC-milled from billet aluminum, the housing is available in high gloss polished finish or bright black anodized. The compact housing allows two or more units to be mounted on one handlebar. The buttons are of high quality, very robust and protected against vibrations and splash water (IP65). Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe shifting feeling during operation - even when operating with a glove. This feedback lets you know immediately what you are doing without having to check the switching process every time.
Thanks to two connections per push-button, single-wire or two-wire wiring is easily possible. A connection for ground is already provided internally for single-wire wiring. A cable routing in the handlebar is therefore easy to carry out. In case of possible damage, the buttons are available individually and can be replaced.
The mo.Switch is of course compatible with all common button controls such as the mo.Unit.
Dimensions:
Inside diameter: 22mm
Outside diameter: approx. 49mm
Width: 20,5mm
Scope of supply:
mo.Switch Aluminiumo.housing
2 high-quality push-buttons per unit
Stainless steel mounting screws M5
Installation instructions
| Οδηγίες τοποθέτησης: | Λήψη |
| Χρώμα: | γυαλιστερό μαύρο |
|---|---|
| Εκτέλεση: | 7/8 ίντσας |
