HIGHSIDER CNC stylus switch with 2 styli, black
49,95 €
Θα σας αποστείλουμε υπενθύμιση
Εισαγάγετε τη διεύθυνση email σας, ώστε να μπορούμε να σας αποστείλουμε υπενθύμιση μόλις το προϊόν είναι ξανά διαθέσιμο στο επιθυμητό μέγεθος.
Περιγραφή
HIGHSIDER complete CNC milled switch with two buttons.
Suitable for 7/8 inch and 1 inch handlebars. Universally applicable for controlling load relays, switching various modes on speedometers, etc.
Precisely tuned the extensive accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.
Dimensions
Width: 12 mm
Depth: 40 mm
Pushbutton Ø: 4.5 mm
Rubber: 75 mm x 0.3 mm
HEX screws: M3 x 12 mm
Cable length: 570 mm
br/>Application:
Knob A : green + red
(from bottom)
knob B : green + brown
green = input signal
scope of supply:
1 piece push-button
1 x rubber
2 x screw
notes: NOT for currents above 0.05 amperes. At 12 Volt max. 0.6 Watt!
Suitable for 7/8 inch and 1 inch handlebars. Universally applicable for controlling load relays, switching various modes on speedometers, etc.
Precisely tuned the extensive accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.
Dimensions
Width: 12 mm
Depth: 40 mm
Pushbutton Ø: 4.5 mm
Rubber: 75 mm x 0.3 mm
HEX screws: M3 x 12 mm
Cable length: 570 mm
br/>Application:
Knob A : green + red
(from bottom)
knob B : green + brown
green = input signal
scope of supply:
1 piece push-button
1 x rubber
2 x screw
notes: NOT for currents above 0.05 amperes. At 12 Volt max. 0.6 Watt!
| Οδηγίες τοποθέτησης: | Λήψη |
| Χρώμα: | Μαύρο |
|---|---|
| Εκτέλεση: | Δύο κουμπιά |
| Διάμετρος σπειρώματος: | Μ3 |
