64,95 €
Pošleme ti pripomienku
Zadaj svoju e-mailovú adresu, aby sme ťa mohli upozorniť, len čo bude položka v požadovanej veľkosti opäť k dispozícii.
Opis
HIGHSIDER VICTORY-X handlebar end mirror, for 1-inch and 7/8-inch handlebars, black anodized.
- 10 year anniversary edition of the motorcycle mirror top seller HIGHSIDER VICTORY -
Edler handlebar end mirror with a head of black anodized aluminum. Due to the elaborate CNC milled surface with grooves, the HIGHSIDER VICTORY-X looks even more elegant and gives the timeless shape a new visual highlight.
Fits 1 inch (25.4 mm) and 7/8 inch (22 mm) handlebars. Can be used for left and right side, E-tested.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. That is prudence in perfection.
Dimensions:
A width head: 117 mm
B height head: 83 mm
C total width: 82 mm
D total height: 175 mm
stem length center-center: 120 mm
outer diameter of clamping: 37 mm
Scope of delivery: 1 pc. incl. Reducing rings for 1 inch and 7/8 inch
Note:
Tightening torque of the M5 screw: 5-7 Nm
Tip:
To close any holes for mounting the original handlebar mirrors, use the HIGHSIDER caps.
- 10 year anniversary edition of the motorcycle mirror top seller HIGHSIDER VICTORY -
Edler handlebar end mirror with a head of black anodized aluminum. Due to the elaborate CNC milled surface with grooves, the HIGHSIDER VICTORY-X looks even more elegant and gives the timeless shape a new visual highlight.
Fits 1 inch (25.4 mm) and 7/8 inch (22 mm) handlebars. Can be used for left and right side, E-tested.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. That is prudence in perfection.
Dimensions:
A width head: 117 mm
B height head: 83 mm
C total width: 82 mm
D total height: 175 mm
stem length center-center: 120 mm
outer diameter of clamping: 37 mm
Scope of delivery: 1 pc. incl. Reducing rings for 1 inch and 7/8 inch
Note:
Tightening torque of the M5 screw: 5-7 Nm
Tip:
To close any holes for mounting the original handlebar mirrors, use the HIGHSIDER caps.
| Návod na montáž: | Stiahnuť |
| Farba: | čierna |
|---|---|
| Poprava: | Pre riadidlá s dĺžkou 7/8 a 1 palc |
Súvisiace produkty
Doplnkové produkty
Alternative products
