54,95 €
Pošleme vám pripomienku
Zadajte svoju e-mailovú adresu, aby sme vás mohli upozorniť, len čo bude položka v požadovanej veľkosti opäť k dispozícii.
Opis
HIGHSIDER MONTANA-BLAST handlebar end mirror, long, E-approved.
- Surface fine bead blasted black satin -
handlebar end mirrors give motorcycles a very special look. For those who find NORMAL mirrors simply too unspectacular, the HIGHSIDER handlebar end mirror range offers the solution. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with the predecessor, the mirror is made of high-quality materials that are perfectly crafted as usual. The matte black anodized aluminum, finely bead blasted, emphasizes the valuable look. Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Mirror can be mounted on the right and left, as well as standing up or hanging down. Mountable either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror mount.
Accessory Tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer required, can be covered with this in an attractive manner.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. That is prudence in perfection.
Dimensions:
A/B Ø head: 102 mm
C Total width: 195 mm
D Total height: 185 mm
Stem length: 70 mm from the head to the bend and 115 mm to the end of the clamp
Weight: 208 g
Scope of delivery: 1 piece.
- Surface fine bead blasted black satin -
handlebar end mirrors give motorcycles a very special look. For those who find NORMAL mirrors simply too unspectacular, the HIGHSIDER handlebar end mirror range offers the solution. Discreet, clear - these are the rear view mirrors of the HIGHSIDER MONTANA series. As with the predecessor, the mirror is made of high-quality materials that are perfectly crafted as usual. The matte black anodized aluminum, finely bead blasted, emphasizes the valuable look. Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Mirror can be mounted on the right and left, as well as standing up or hanging down. Mountable either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror mount.
Accessory Tip:
The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer required, can be covered with this in an attractive manner.
Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. That is prudence in perfection.
Dimensions:
A/B Ø head: 102 mm
C Total width: 195 mm
D Total height: 185 mm
Stem length: 70 mm from the head to the bend and 115 mm to the end of the clamp
Weight: 208 g
Scope of delivery: 1 piece.
| Farba: | čierne perlové |
|---|---|
| Poprava: | Pre riadidlá s dĺžkou 7/8 a 1 palc |
Súvisiace produkty
Doplnkové produkty
Alternative products
