motogadget Standard relé
274,01 kr
SJEKK TILGJENGELIGHET I BUTIKKEN
Tilgjengelighet i butikken
Hent produktet i dag
Reserveres eksklusivt for deg i to dager
God tid til å teste før du kjøper
Bestill produktet på nett, og hent det i butikken.
FC-Moto Store
Aachener Str. 21-23
52146 Würselen
Åpningstider
Man. til fre. kl. 10–19
Lørdag kl. 10–18
Vi sender deg en påminnelse
Skriv inn e-postadressen din, slik at vi kan varsle deg så snart varen er tilgjengelig igjen i ønsket størrelse.
Beskrivelse
The mo.Relay is a very small relay for the control of almost all loads.
Z.B. High beam, low beam, horn, ignition etc. can be switched easily and almost lossless. Larger working currents are thus placed close to the consumer (e.g. lamp). Only a minimum control current needs to be conducted via the ignition lock and/or handlebar switch. Failures and charred contacts are a thing of the past. In addition, the brightness of the lighting, for example, is noticeably improved by reduced line losses - a clear plus in safety!
A central threaded hole on the upper housing surface enables simple mounting at almost any location, even when several mo.relays are mounted. The housing of the mo.Relay is made of solid aluminium and black anodized. It is completely waterproof and vibration resistant.
Dimensions:
Diameter without cable 19 mm
Height 19mm
Scope of supply: 1 piece
ACHTUNG!
The mo.Relay is not suitable as push button control! These can be found under mo.Unit.
The mo.Relay is not suitable as a flasher relay! These can be found under mo.Flash, mo.Wave, mo.Stop or with push button control under mo.Relay+.
Z.B. High beam, low beam, horn, ignition etc. can be switched easily and almost lossless. Larger working currents are thus placed close to the consumer (e.g. lamp). Only a minimum control current needs to be conducted via the ignition lock and/or handlebar switch. Failures and charred contacts are a thing of the past. In addition, the brightness of the lighting, for example, is noticeably improved by reduced line losses - a clear plus in safety!
A central threaded hole on the upper housing surface enables simple mounting at almost any location, even when several mo.relays are mounted. The housing of the mo.Relay is made of solid aluminium and black anodized. It is completely waterproof and vibration resistant.
Dimensions:
Diameter without cable 19 mm
Height 19mm
Scope of supply: 1 piece
ACHTUNG!
The mo.Relay is not suitable as push button control! These can be found under mo.Unit.
The mo.Relay is not suitable as a flasher relay! These can be found under mo.Flash, mo.Wave, mo.Stop or with push button control under mo.Relay+.