The hoses are produced on demand, so returns are not possible for these items.
Replacing only the top-line from master break pump to the manifold Our Tecnium aviation hoses (braided brake or clutch lines) are designed and manufactured in Switzerland by our partner Speedbrakes and assembled in France at our assembly unit with the highest standards of material and assembly quality.Fully customizable, the hoses are available with an external Nylon sheath in clear or smoked (Carbon) and fittings (banjos) in black, silver, gold, blue, red, or titanium.
- Internal core made of PTFE Teflon reinforced with a high-strength stainless steel braided sheath protected by its nylon cover.
- TÜV and/or ABE certified
- Swiveling banjos for easier installation and adjustment of the hoses
- ABS compatible depending on the references
- Original or alternative configurations (X-over, direct, etc.) depending on the references
Product features
- Homologation: ABE homologiert
- Position: Vorne
- Quantity: 1
- Specificity: FITTING : Top-line
- Banjo color: Rouge
- Hose color: Carbone
- Hose set-up type: OE type Top Line
Size table for TECNIUM SPEEDBRAKES Aviation Brake Hose Carbon/Red Banjo:
| EU Size | US Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- ZZR 1100 (ZX1100C) (1991 - 1991) bikeSystem.attachmentPositions.position: Front
- ZZR 1100 (ZX1100C) (1990 - 1990)
- ZZR 1100 (ZX1100C) (1992 - 1992) bikeSystem.attachmentPositions.position: Front
- ZZR 1100 SPECIAL EDITION (ZX1100C) (1991 - 1991)