Revit Control perforated Motorcycle Leather Jacket

Racing-inspired, multi-seasonal technical leather jacket for sporty road riders.

Features:

Outer fabric: synthetic leather, Monaco Performance cowhide, neoprene and polyester stretch
Mesh lining
3 inside pockets, slit pocket at the waist and Napoleon inside pocket
Adjustment straps at the waist
Adjustable cuffs
Jeans loop
Comfort cuffs and comfort collar
Short and long connecting zipper
Zipper at the cuff
Stretch at the armholes, shoulder, elbow, waist and sleeves
Soft collar edge
Removable thermal body warmer
Wind flap behind the cuff zipper and behind the front zipper
Perforation on the upper back and on the front
Fully perforated outer shell

Specifications:

Protective clothing for motorcyclists, protection class AAA (EN 17092-3:2020)
Seeflex elbow protectors level 2 (included)
Seeflex shoulder protectors level 2 (included)
Prepared for Seesoft back protector level 2 (not included)
Prepared for two-piece Seesoft chest protector level 1 (not included)
Reflective logo on the back
Ready for Avertum Tech-Air® Airbag System (not included)

Color:	black/white
Size:	58
Tops Type:	Jackets
Features:	perforated, removable inner lining
Gender:	Men
Material:	Leather, Textile
Season:	Summer
Application area:	Urban / City
Protection class (certification):	Protection class AAA
Material composition:	55% leather, 35% polyester, 6% polyurethane, 4% elastane/Contains non-textile parts of animal origin!

Show more emzFcMoto.product.showLess

Size table

Size table for Revit Control perforated Motorcycle Leather Jacket:

Measurements in:

emzFcMoto.product.sizeTableUnitInch

emzFcMoto.product.sizeTableUnitCm

Size	Chest (cm)	Waist (cm)
46	92 - 96	79 - 83
48	96 - 100	83 - 87
50	100 - 104	87 - 91
52	104 - 108	91 - 96
54	108 - 112	96 - 101
56	112 - 117	101 - 107
58	117 - 123	107 - 113

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.