Malossi X-Kevlar drive belts are greatly adherent, enabling them to transmit all of the engine’s power in the best conditions. They have been developed with all of the company’s expertise in the field, in close collaboration with Malossi’s competition department.
- Patented K-Belt technology: 7 superimposed layers of different components
- Reinforced Kevlar
- For maximum performance
- Excellent heat resistance
- Set a benchmark in racing belt durability
Product features
- Width (mm): 19.9
Size table for MALOSSI X-Kevlar Reinforced Transmission Belt:
| EU Size | US Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.