$363.80
The product is currently unavailable, but we will be happy to notify you by e-mail
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
LED technology that guarantees low energy consumption, making the S322 suitable for mounting on motorcycles with small engines, without the risk of draining the battery
Easily attached to all engine-guards with a tubular diameter of between 21mm and 25mm
Supplied with fuse and cables for direct connection to the battery and with a waterproof switch to mount on the handlebar
Also supplied with a third cable to connect to the motorcycle ignition lock
Only 14 W power absorption per light
Easily attached to all engine-guards with a tubular diameter of between 21mm and 25mm
| EU declaration of conformity: | Download |
Size table for GIVI LED - Additional lighting for enduros with E11-EC approval Ø 21mm - 25mm:
| EU Size | US Size | Foot Length (cm) |
|---|---|---|
| 33 | 1 | 20.3 |
| 34 | 2 | 21.1 |
| 35 | 2.5 | 22 |
| 36 | 3 | 22.4 |
| 37 | 4 | 23.2 |
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.