Skip to main content Skip to search Skip to main navigation
100-day return policy
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Athena S.p.A. Cylinder Kit Ø77mm - Yamaha YZ250F (19-) / WR250F (20-21)
Description

Standard Bore Cylinder Kit

  • Same reliability and performance of the original components
  • Maximum durability and smoothness guaranteed by a special nickel and silicon treatment
  • Gaskets developed with the most advanced technologies to ensure maximum tightness even at high temperatures and pressures

Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance.

All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.

Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.

The Standard Bore cylinder kit developed by Athena guarantees the same performance as the original spare parts, extreme reliability and optimal smoothness as a result of the lightweight aluminum cylinder, the barrel with nickel-silicon coating, and a piston designed to reduce further friction.

The kit includes the high-quality aluminum cylinder with standard bore, the complete piston with the piston pin and rings, and all the necessary gaskets.

All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.

This cylinder kit can be installed without making any changes to the engine crankcase.


Product features

  • Material: Aluminium
  • Diameter Ø (mm): 77

Size table for Athena S.p.A. Cylinder Kit Ø77mm - Yamaha YZ250F (19-) / WR250F (20-21):

Measurements in:
emzFcMoto.product.sizeTableUnitCm
EU Size US Size Foot Length (cm)
33 1 20.3
34 2 21.1
35 2.5 22
36 3 22.4
37 4 23.2
38 5 24
39 5.5 24.5
39.5 5.5 24.7
40 6 24.9
41 7 25.7

How to measure your height:

Sizing Info
1 Foot length

Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.

2 Foot width

Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.

This product is suitable for the following motorcycles:

Reviews

0 out of 0 ratings

Average rating of 0 out of 5 stars

Rate this product!

Share your experiences with other customers.


de-DE fr-FR fr it-IT nl-NL de-CH de-AT fr-CH it-CH cs-CZ da-DK fi-FI no-NO pl-PL fr-BE nl-BE en-US ja-JP zh-CN zh ko-KR pt-PT pt zh-TW de-LU en-IE en-GB ru-RU es-ES es bg-BG en ro-RO sv-SE en-CA fr-CA en-AU en-AE hr-HR el-GR hu-HU lv-LV sk-SK sl-SI