All Balls Racing tapered roller bearing kit for the steering head:
- includes all bearings and seals needed for installation
- high quality OE replacement for ball bearings or direct replacement for tapered bearings
- specially made sealing lips that protect from dirt and water, as well as keep the
bearing grease clean.
Outdoor Diameter: 48.5 / 50.0 mm.
Internal diameter: 26.0 / 30.0 mm.
Height: 15.0 / 14.25 mm.
Scope of supply:
Tapered bearing: 1
Tapered bearing: 1
Washer 1
Washer: 1
Other part: 1
Seal: 1
Seal: 1
Size table for ALL BALLS 22-1011 steering head bearing kit:
| EU Size | US Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- CB 350 Four
- CB 350 K
- CB 360
- CB 400 FOUR
- CB 400 N
- CB 400 Twin Automatic
- CB 500
- CB 500 T
- CB 550 K
- CB 750 F1 Sport
- CB 750 F2 Super-Sport
- CB 750 Four
- CM 400 T
- CN 250 SPAZIO (MF02)
- CX 500
- CX 650 C Custom
- CX 650 E Euro
- FT 500
- GB 500 Clubman
- GL 1000 Goldwing
- GL 500 Silver Wing
- GL 650 D Silver Wing
- VT 125 C Shadow
- VT 500 C
- XL 125 V Varadero
- XL 125 V Varadero 80 km/h