Revit Argon 2 Two Piece Motorcycle Leather Suit black/white/red

€849.99 You are saving €200.00

€649.99

Price incl. VAT, plus shipping

Color: black/white/red

The product is currently unavailable, but we will be happy to notify you by e-mail

Please enter your email address so that we can notify you as soon as the item is available again in your desired size.

Revit Argon 2 Two Piece Motorcycle Leather Suit

Color: black/white/red

Size: 50

€849.99

€649.99

Description

Revit Argon 2 Two Piece Motorcycle Leather Suit

Building on the success of the one-piece entry-level racing suit in the Argon 2 series, Revit brings you the new Argon 2 two-piece suit: Full leather jacket and pants with connecting zipper for sporty street riders. As part of the Argon 2 product family, the Argon 2 two-piece has the same racing aesthetic. However, Revit has made a few changes to diversify the suit. The prints are similar to those of the one-piece, but reversed. The suit has been anatomically correctly perforated to cool you down and it's built to allow you to take corners at high speeds. How is this achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 race suit. Since Revit is always thinking about what the future holds, Revit wanted to make sure that you can equip the Argon 2 suit with the Tech-Air® airbag if you want to. It's actually our first two-piece specifically designed to be compatible with airbags. The revised shape and softer blend of the aero hump combined with additional stretch make this possible. And as with many of our airbag-compatible garments, we recommend going up a size to be on the safe side. Thanks to the AAA class, you are in good hands with the Argon 2 two-piece. It comes with knee sliders, protectors on the elbows, shoulders, knees and hips as well as TPU protectors on the shoulders as standard.

Features:

Outer fabric: buffalo leather, synthetic leather, artificial nubuck, neoprene and polyester stretch
3D mesh lining
Ventilation: Perforation on the upper front and PWR|Fuse AirMesh on the aero hump
Insulation: wind flap behind cuff zipper and front zipper
Inner pocket, Napoleon inner pocket and 2 inner pockets
Aero hump
B-lock button closure at the front
Stretchy cuffs
Comfort cuffs
Comfort collar
Zipper on the cuff
Stretch at ankle, inner leg, inner knee, armholes, shoulder, waist, calf, back, crotch and sleeves
Calf zipper for easy entry
Soft collar edge

Specifications:

Class AAA motorcycle protective clothing (EN 17092-4, 2020)
Prepared for Avertum Tech-Air® Airbag System-One Size Up
SEEFLEX elbow protectors level 2 (included)
SEEFLEX knee protectors level 2 (included)
SEEFLEX shoulder protectors level 2 (included)
SEESMART hip protectors level 1 (included)
Prepared for SEESOFT back protector level 2 (not included)
Prepared for two-piece SEESOFT chest protector level 1 (not included)
Two-component knee sliders type A
TPU shoulder caps
Tail bone protection
Safety seams

Color:	black/white/red
Size:	50
Suit Type:	2-Piece Suits
Material type:	Cowhide leather
Gender:	Men
Material:	Leather, Textile
Application area:	Sports
Protection class (certification):	Protection class AAA
Material composition:	59% leather, 34% polyester, 4% elastane, 3% polyurethane / Contains non-textil parts of animal origin!

Show more Show less

Size table

Size table for Revit Argon 2 Two Piece Motorcycle Leather Suit:

Measurements in:

inch

Size	Chest (cm)	Waist (cm)	Hip (cm)	Inner Leg Lenth (cm)
46	92 - 96	79 - 83	91 - 95	77 - 81
48	96 - 100	83 - 87	95 - 99	78 - 82
50	100 - 104	87 - 91	99 - 103	79 - 83
52	104 - 108	91 - 96	103 - 107	80 - 84
54	108 - 112	96 - 101	107 - 111	81 - 85
56	112 - 117	101 - 107	111 - 116	82 - 86

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.