Helite e-Turtle 2.0 Airbag Vest black

Helite e-Turtle 2.0 Airbag Vest

Helite presents the new electronic airbag vest. A brand new technology for maximum protection on the road. A true revolution in protection and fall detection! The electronic airbag vest uses a multi-sensor detection that allows a complete analysis of the situation and a complete 360° protection. For the complete and optimal Full Protection, it is strongly recommended to install a second sensor (SDU) on the fork of the motorcycle. This option allows to reduce the detection time from 60 ms (only by sensors in the vests) to 31 ms even at standstill, low speed and regardless of the impact angle.

Features:

• Based on the Turtle 2.0 airbag vest.
• Mechanical deployment unit has been replaced with an electronic one
• Includes Turtle 2.0 and high quality SAS-Tec back protector (is mounted over the airbag like a turtle shell)
• Point loads in the back area are thus effectively distributed and absorbed by the entire airbag
• Protection is many times higher than with a standard airbag
• Turtle airbag systems demonstrate a technological advantage, particularly in the event of impacts against sharp-edged objects (e.g. guardrail, branch or motorcycle part)
• When triggered, system has optimum pressure after 80-100 milliseconds (depending on size) to provide full protection
• 17-28 liters (depending on size) of protective volume provide protection for neck, spine, chest, pelvis, coccyx, head, collarbone and internal organs
• By simply replacing the e-cartridge, the vest is immediately ready for use again after a deployment (provided there is no external damage)
• New e-cartridge with clip connector

What has changed?

• New and optimized battery
• Improved on/off switch to prevent accidental power off
• The cartridge now has a “click” connector (snaps into place) instead of the jack connection

Specifications:

• Protection volume: 17 - 28 liters
• Fall detection: 60 ms (from 31 ms with fork sensor)
• Airbag inflation time: 80 - 100 ms (depending on size)
• Optimized battery performance
• Improved on/off switch to avoid accidental switching off of the control unit
• Integrated protector: yes (back protector from SAS-TEC)

Size chart:

To determine your size, we recommend you measure yourself in a t-shirt or thin sweater.

XS:

• Body height (cm): 150 - 165
• Chest circumference (cm): 78 - 87
• Waist measurement (cm): 70 - 79
• Hip circumference (cm): 77 - 86
• Back length (cm): 30 - 45
• Capsule: 60 cc

S:

• Height (cm): 160 - 175
• Chest circumference (cm): 85 - 94
• Waist circumference (cm): 77 - 86
• Hip circumference (cm): 84 - 93
• Back length (cm): 45 - 55
• Capsule: 60 cc

M:

• Height (cm): 165 - 185
• Chest circumference (cm): 92 - 101
• Waist circumference (cm): 84 - 93
• hip circumference (cm): 91 - 100
• Back length (cm): 50 - 60
• Capsule: 60 cc

L:

• Height (cm): 170 - 190
• Chest circumference (cm): 99 - 108
• Waist circumference (cm): 91 - 100
• Hip circumference (cm): 98 - 107
• Back length (cm): 55 - 65
• Capsule: 60 cc

XL:

• Height (cm): 175 - 200
• Chest circumference (cm): 106 - 115
• Waist circumference (cm): 98 - 107
• Hip circumference (cm): 105 - 114
• Back length (cm): 60 - 70
• Capsule: 60 cc

L-L:

• Body size (cm): 170 - 190
• Chest circumference (cm): 113 - 122
• Waist circumference (cm): 105 - 114
• Hip circumference (cm): 112 - 121
• Back length (cm): 55 - 70
• Capsule: 100 cc

XL-L:

• Height (cm): 175 - 200
• Chest circumference (cm): 120 - 129
• Waist circumference (cm): 112 - 121
• Hip circumference (cm): 119 - 128
• Back length (cm): 60 - 75
• Capsule: 100 cc

Manufacturer's Notice:

• SAS-Tec back protector (EN1621-2), in combination with the shock-absorbing air cushion, provides optimal impact absorption and protection against punctures.
• Very high abrasion resistance due to 600D textile material to protect the airbag chamber.

Contents:

• 1x Helite airbag vest
• 1x CO2 cartridge with clip connector (mounted)
• 1x charging cable
• 1x user manual
• without fork sensor (can be purchased optionally)