€275.95
The product is currently unavailable, but we will be happy to notify you by e-mail
We’ll remind you
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Description
APE Hanger FAT-BAR
- Fits Harly-Davidson models from Bj. 2008
- Tube Ø 1 1/4 inch (31.75 mm), with stepped handle ends on Ø 1 inch (25.4 mm) over a length of about 204 mm
- 1 1/4 inch Ø also in the clamping area. Therefore, on motorcycles with 1 inch mount only mountable with matching risers.
3 hole version for internal cable routing:
- Each 1 long hole 10 x 20 mm in the cable notch in the area of the handles
- 1 x centered between the clamping points
Approval: A Technical Report is available for this handlebar to support an individual acceptance according to § 21.
Note Technical Report: Testers from TÜV, Dekra, GTÜ and KÜS, who have training as AAS (Officially Recognized Expert) AASMT (Officially Recognized Expert with partial authority) USB (Signature Authorized Technical Service), are authorized to perform an attachment test with individual appraisal.
Identification: AH2HDF
Dimensions:
a Width: 925 mm
b Height: 300 mm
c Depth: 195 mm
d Height lower edge handlebar end: 265 mm
e Clamping range: 310 mm
- Fits Harly-Davidson models from Bj. 2008
- Tube Ø 1 1/4 inch (31.75 mm), with stepped handle ends on Ø 1 inch (25.4 mm) over a length of about 204 mm
- 1 1/4 inch Ø also in the clamping area. Therefore, on motorcycles with 1 inch mount only mountable with matching risers.
3 hole version for internal cable routing:
- Each 1 long hole 10 x 20 mm in the cable notch in the area of the handles
- 1 x centered between the clamping points
Approval: A Technical Report is available for this handlebar to support an individual acceptance according to § 21.
Note Technical Report: Testers from TÜV, Dekra, GTÜ and KÜS, who have training as AAS (Officially Recognized Expert) AASMT (Officially Recognized Expert with partial authority) USB (Signature Authorized Technical Service), are authorized to perform an attachment test with individual appraisal.
Identification: AH2HDF
Dimensions:
a Width: 925 mm
b Height: 300 mm
c Depth: 195 mm
d Height lower edge handlebar end: 265 mm
e Clamping range: 310 mm
