Revit Storm WB Jacket
£85.57
Price excluding VAT, plus shipping
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Revit Storm WB Jacket
When you get really, really cold, your brain instructs your body to go into emergency mode and to protect your organs by transferring energy to your so-called ‘core.’ Not so strange when you think about it, really. But it also explains why the Storm WB jacket has been constructed the wayit has been. We kept the core in mind when we made the Storm WB and this is how Revit were able to make it so potent.
Aside from the great insulation and moisture managing capacity of the Storm WB mid layer jacket, its key feature is the additional EXKIN® Air insulation panels. These are located at strategic areas, placed behind the newly developed hydratex® WindBarrier® fabric, providing a thinner, more comfortable experience without restricting the rider in terms of freedom of movement or comfort.
The hydratex® WindBarrier® fabric has a double function. On the one hand, it completely blocks the wind and, on the other hand, it is also waterproof and highly breathable. So, get out there and have some cold-weather fun.
Protection
Outer Shell
- Hydratex® WindBarrier® fabric: The hydratex® WindBarrier® features a soft backing so it's comfortable against the skin. It's touted for its breathability and ability to block wind. Additionally, WindBarrier® is a laminated three-layer fabric.
- Polyester 30D with WR finish: The matte finish and water repellant characteristics of this material make it ideal to use in a variety of products.
- Polyester spandex knit: Polyester spandex knit is a thin, stretchable material used to make items more flexible and comfortable.
Insulation
- Polartec® Thermal Pro®: Developed by Polartec®, Thermal Pro® was created to offer all the warmth without the weight. The dependable wind and water repellent exterior is strengthened by an inherent resilience against abrasive surfaces. The plush inner face of Polartec® Thermal Pro® ensures a soft and smooth fit against your skin at all times. It’s also highly breathable, fast-drying, durable and easy to care for.
Ergonomic
Features
- Wind catcher behind front zipper: Behind the front a panel has been installed to block the wind.
- Thumb loop: The thumb loop is found on shirts to make it easy to keep your top in place when pairing it with our jackets. Because of the thumb loop, the shirt will properly stay in place also when putting gloves on.
- Insulating function
- Moisture wicking function: Perspiration is constantly moved away from the skin to the outer layer of the fabric, where it can evaporate quickly. This helps you to control your body temperature and keeps you dry and comfortable.
- Stretchable
Fit
- regular fit
- tour fit
Pockets
- chest pocket
| Color: | black |
|---|---|
| Size: | S |
| Tops Type: | Jackets |
| Gender: | Men |
| Material: | Textile |
| Season: | Winter |
| Material composition: | 85% polyester, 8% cotton, 7% elasthane |
Size table for Revit Storm WB Jacket:
| Size | Chest (cm) | Waist (cm) |
|---|---|---|
| S | 90 - 96 | 77 - 83 |
| M | 96 - 102 | 83 - 89 |
| L | 102 - 108 | 89 - 96 |
| XL | 108 - 115 | 96 - 104 |
| XXL | 115 - 123 | 104 - 113 |
| 3XL | 123 - 132 | 113 - 122 |
How to measure your height:
Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.
Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.
Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.
Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.
Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.
Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.
Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.
Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.