The Sand 3 trousers were developed alongside with the Sand 3 jacket to create an adventure suit as versatile as a Swiss army knife. Like the jacket, these trousers are made out of a tough combination of polyester ripstop and PWR|shell material to make them ready to withstand serious use and abuse. From the outside in they consist of the abrasion resistant outer shell including SEEFLEX™ level 2 knee protectors and SEESMART™ hip protectors, a 100% waterproof detachable hydratex liner, and a snug detachable thermal liner. With both liners removed, the VCS zippers at the upper leg allow air to flow directly to the legs for instant cooling in hot conditions. Thanks to the grip panel at the back the Sand 3 trousers prevent sliding on the seat under acceleration or braking. Laminated reflection on the calves ensures visibility in the dark, and the YKK slide lock front closure adds comfort to the waist area. The long and short connection zippers are incorporated to allow riders to create a full connected suit with the Sand 3 jacket.

PROTECTION FEATURES

Outer shell polyester ripstop | PWR | shell 500D | polyester 600D | PWR | shell 500D stretch | sure grip | Lorica®
Insulation detachable thermal liner
Protection SEEFLEX™ Level 2 protection | SEESMART™ level 1 type B hip protector insert - version RV33
Visibility laminated reflection
Waterproofing & Breathability hydratex® | 3L
Composition 48% Polyester, 38% Polyamide, 14% Other Fibres

ERGONOMIC FEATURES

Fit tour fit | regular
Adjustability adjustable strap | adjustment tab
Ventilation VCS | zippers
Features stretch panel | short and long connection zipper | adjustable protector pockets | calf zippers | grip panel at seat | YKK slide lock front closure
Pockets stash pockets

Color:	black
Size:	S
Pants Type:	Pants
Features:	Knee protectors included, Removable membrane, Waterproof, removable inner lining
Gender:	Men
Material:	Textile
Application area:	Enduro / Adventure, Touring
Material composition:	48% Polyester, 38% Polyamide, 14% Other Fibres

Show more Show less

Size table

Size table for Revit Sand 3 Textile Pants:

Measurements in:

inch

Size	Product Size	Hip (cm)	Inner Leg (cm)
XS	Standard	88 - 92	76 - 80
S	Kurz	93 - 97	72 - 76
S	Standard	93 - 97	77 - 81
M	Kurz	98 - 102	74 - 78
M	Standard	98 - 102	79 - 83
M	Lang	98 - 102	84 - 88
L	Kurz	103 - 107	75 - 79
L	Standard	103 - 107	80 - 84
L	Lang	103 - 107	85 - 89
XL	Kurz	108 - 113	77 - 81
XL	Standard	108 - 113	82 - 86
XL	Lang	108 - 113	87 - 91
XXL	Kurz	114 - 119	78 - 82
XXL	Standard	114 - 119	83 - 87
XXL	Lang	114 - 119	88 - 92
3XL	Kurz	120 - 125	80 - 84
3XL	Standard	120 - 125	85 - 89
3XL	Lang	120 - 125	90 - 94
4XL	Standard	126 - 131	86 - 90

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Revit Sand 3 Textile Pants black

Size table for Revit Sand 3 Textile Pants:

How to measure your height:

Reviews

Revit Sand 3 Textile Pants black

Size table for Revit Sand 3 Textile Pants:

How to measure your height:

Reviews

Log in