Skip to main content Skip to search Skip to main navigation
100-day return policy
Worldwide shipping

10% discount on all selected items!* Code:

Revit Outback 4 H2O Motorcycle Textile Jacket black

Average rating of 4 out of 5 stars

(1)
Description

Revit Outback 4 H2O Motorcycle Textile Jacket

Adventure travel means exploring and experiencing new places. It means going where only motorcycles can go, to the most remote and lonely corners of the earth. That's why every REV'IT! models for this purpose incorporates extensive research and development by adventure travel experts. The biggest challenge with the Outback 4 H2O was to improve an exemplary touring jacket. And as you might expect, it's the details of this fourth-generation garment that make all the difference. Because the warming and waterproof layers are removable, there is not only more room to move, but also almost limitless adjustment options. The elbow protectors can be perfectly positioned, and there are adjustment tabs on the lower and upper arms. The zippers on the cuffs fit the gloves just needed, under or over the outer shell in any season. With an adjustable drawcord at the hem and straps at the waist, the Outback 4 H2O fits your body exactly the way you want it to. And thanks to the Flexisnap system, you can quickly change the collar circumference, for example, to attach a wind collar or to catch a cooling breeze on hot days. The Outback 4 H20 comes standard with SEEFLEX Level 2 protectors on the shoulder and elbow. This high-spec, adaptable jacket has dedicated pockets for optional SEESOFT protectors on the back and chest. The addition of the Neon Connector vest increases visibility and complements the reflective details on the front, arms and top ventilation zipper on the back.

Features:

  • High density polyester 600D outer fabric and polyester ripstop with Teflon® coating.
  • Flexisnap on the collar
  • Drawcord for adjustment at the waist
  • Adjustable elbow protectors
  • Adjustment tab on upper arm, forearm and cuffs
  • Adjustment straps at the waist
  • Storage pocket on the back, insert pocket on the chest, inner pocket in the thermal lining, Napoleon inner pocket, waterproof inner pocket in the waterproof lining, 2 front storage pockets, 2 handwarmer pockets and 2 inner pockets
  • 3D mesh lining
  • Short connection zipper
  • Short connection zipper on removable waterproof lining
  • Zipper on cuff
  • V-shaped cover flap at cuff
  • Soft collar edge
  • Two-way snap closure system
  • Removable waterproof hydratex®|Lite lining
  • Ventilation panels at chest
  • Air vent at upper back
  • Zippers on the underarms

Specifications:

  • Class AA, EN 17092-3:2020
  • 3D mesh protector pockets
  • SEEFLEX™ elbow protectors, level 2
  • SEEFLEX™ shoulder protectors, level 2
  • Prepared for SEESOFT™ back protector level 2
  • Prepared for two-piece SEESOFT™ chest protector level 1
  • Laminated, reflective material on upper arms and chest
  • Reflective logo on back
Color: black
Size: M
Tops Type: Jackets
Features: Waterproof, removable inner lining
Gender: Men
Material: Textile
Application area: Touring
Material composition: 100% Polyester

Size table for Revit Outback 4 H2O Motorcycle Textile Jacket:

Measurements in:
cm

How to measure your height:

Sizing Info
1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Reviews

1 out of 1 ratings

Average rating of 4 out of 5 stars


0%

100%

0%

0%

0%


Rate this product!

Share your experiences with other customers.


1 review

10 July 2025 14:27

Rated 4 out of 5 stars

4 out of 5

The product is really good for it's money

Dear customer, we have a new shop. You have been automatically redirected.
You were logged into our old shop before the redirect; please log in again to the new shop.
You had a shopping cart in the old shop that could not be transferred. Please refill it with your desired items.