Revit Horizon 3 H2O Motorcycle Textile Pants

The Horizon 3 H2O motorcycle pants allow you to create a fully laminated, top-to-bottom waterproof motorcycle suit when paired with the Horizon 3 H2O motorcycle jacket. By laminating our hydratex|Lite membrane directly to the outer shell, we've created a 100 percent waterproof motorcycle pant with zero water absorption. Adjustable SEEFLEX Level 2 knee protectors come as standard, as do the extremely thin, equally SEESMART hip protectors. Like the motorcycle jacket of the same name, we have also equipped the Horizon 3 motorcycle pants with our VCS|ventilation system. The large ventilation panels on the thighs can be opened while riding, thanks to clever, innovative magnetic closures. Once opened, two large mesh inserts are revealed, directing cooling air directly to your legs. Two practical pockets transport smaller items close to the body, and thanks to the removable thermal lining, the Horizon 3 H2O motorcycle pants can withstand sub-zero temperatures. Grip inserts on the back of the motorcycle pants prevent you from sliding around on the seat when accelerating or braking, various adjustment tabs and straps ensure a perfect fit to your body.

Features:

Polyester matte 450D 2L, ripstop polyester 2L and Sure Grip fabric
Adjustment strap at the waist
Adjustment tab at ankle
Two slip pockets at the front
3D mesh lining
Adjustable protector pockets
B-Lock button closure in front
Anti-slip material on the buttocks
Long and short connection zipper
Prepared for suspenders strappers
Hydratex®|Lite waterproof membrane
Removable thermal lining
Aquadefence panels on the thighs
Laminated reflective material on the calves

Specifications:

SEEFLEX™ knee protectors EN1621-1:2012 Level 2.
SEESMART™ hip protectors EN1621-1:2012 Level 1
Motorcycle clothing protection class AA EN 17092-3:2020

Color:	black
Size:	S
Pants Type:	Pants
Features:	Knee protectors included, Waterproof
Gender:	Men
Material:	Textile
Season:	Winter
Application area:	Touring
Material composition:	100% Polyester

Show more Show less

Size table

Size table for Revit Horizon 3 H2O Motorcycle Textile Pants:

Measurements in:

inch

Size	Product Size	Hip (cm)	Inner Leg (cm)
XS	Standard	88 - 92	76 - 80
S	Kurz	93 - 97	72 - 76
S	Standard	93 - 97	77 - 81
M	Kurz	98 - 102	74 - 78
M	Standard	98 - 102	79 - 83
M	Lang	98 - 102	84 - 88
L	Kurz	103 - 107	75 - 79
L	Standard	103 - 107	80 - 84
L	Lang	103 - 107	85 - 89
XL	Kurz	108 - 113	77 - 81
XL	Standard	108 - 113	82 - 86
XL	Lang	108 - 113	87 - 91
XXL	Kurz	114 - 119	78 - 82
XXL	Standard	114 - 119	83 - 87
XXL	Lang	114 - 119	88 - 92
3XL	Kurz	120 - 125	80 - 84
3XL	Standard	120 - 125	85 - 89
3XL	Lang	120 - 125	90 - 94
4XL	Standard	126 - 131	86 - 90

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Related products

Revit Seesmart RV33 Hip Protectors

£15.09

Subscription

(15)

Reviews

3 out of 3 ratings

Rate this product!

Share your experiences with other customers.

Log in

Your email address

Your password

Display reviews only in the current language.

Sorted by

3 reviews

2 March 2024 08:57

This pants leak under the rain. Even it not much leak as previous version.

20 February 2023 11:46

Fijn product, vooral heel functioneel

Dit is niet het meest sexy product, maar het werkt perfect!

9 December 2022 10:03

OTTIMO PRODOTTO

Pantaloni da moto veramente eccellenti. Comodi e protettivi. Si regolano in vita in modo perfetto. Consiglio di abbinare le bretelle per una maggiore comodità.

Revit Horizon 3 H2O Motorcycle Textile Pants black

Size table for Revit Horizon 3 H2O Motorcycle Textile Pants:

How to measure your height:

Related products

Reviews

Log in