Revit Cargo 2 TF Motorcycle Jeans

The Cargo 2 TF pants have, you guessed it, large cargo pockets on the thighs. Thanks to the generous volume and loose fit in this area, you can store most, if not all, of your personal items in them. What also sets these pants apart from others is the angled arrangement of the pockets, which makes access with gloves easier and ergonomically adapts to the contour of your legs when riding a motorcycle. In the design, Revit has borrowed some technical constructions (e.g. the pocket pleat), but omitted the topstitching on the pocket flap and replaced it with traditional, extremely robust 2N seams. The pants are also made from a lightweight, newly developed 13.5 oz. stretch twill fabric that is very comfortable and gives you a contemporary figure.

Features:

Outer fabric: 13.5oz CORDURA® stretch twill
6 pockets
Front closure with zipper and buttons
Belt loops
Safety seams
Reflection on the hem

Specifications:

Protective clothing for motorcyclists, protection class A (EN 17092-4:2020)
SEESMART level 1 knee protectors (included)
prepared for SEESMART hip protectors level 1 (not included)

EU declaration of conformity:

Download

Color:	tarmac
Size:	34/30
Pants Type:	Pants
Features:	Knee protectors included
Gender:	Men
Material:	Textile
Application area:	Classic / Chopper, Urban / City
Protection class (certification):	Protection class A
Material composition:	55% Cotton, 18% Polyamide, 27% Polyester

Show more Show less

Size table

Size table for Revit Cargo 2 TF Motorcycle Jeans:

Measurements in:

inch

Size	Product Size	Hip (cm)	Inner Leg Lenth (cm)
28	L30	89 - 93	76,5
28	L32	89 - 93	81,5
28	L34	89 - 93	86,5
28	L36	89 - 93	91,5
30	L30	93 - 96	76,5
30	L32	93 - 96	81,5
30	L34	93 - 96	86,5
30	L36	93 - 96	91,5
31	L30	96 - 99	76,5
31	L32	96 - 99	81,5
31	L34	96 - 99	86,5
31	L36	96 - 99	91,5
32	L30	99 - 102	76,5
32	L32	99 - 102	81,5
32	L34	99 - 102	86,5
32	L36	99 - 102	91,5
33	L30	102 - 105	76,5
33	L32	102 - 105	81,5
33	L34	102 - 105	86,5
33	L36	102 - 105	91,5
34	L30	105 - 109	76,5
34	L32	105 - 109	81,5
34	L34	105 - 109	86,5
34	L36	105 - 109	91,5
36	L30	109 - 113	76,5
36	L32	109 - 113	81,5
36	L34	109 - 113	86,5
36	L36	109 - 113	91,5
38	L30	113 - 117	76,5
38	L32	113 - 117	81,5
38	L34	113 - 117	86,5
38	L36	113 - 117	91,5

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Related products

Revit Seesmart RV33 Hip Protectors

£15.09

Subscription

(15)

Revit Seesmart RV36 Knee Protectors

£23.00

Subscription

(2)

Reviews

2 out of 2 ratings

Rate this product!

Share your experiences with other customers.

Log in

Your email address

Your password

Display reviews only in the current language.

Sorted by

2 reviews

6 February 2026 11:41

High quality pants

29 January 2026 05:37

Superb 👌🏻

Fits true to size. I’m 5’11 average build and i ordered size 34/34. Outstanding quality.Fashionable wear. Looks great. Fabric feels rigid. I recommend.

Revit Cargo 2 TF Motorcycle Jeans tarmac

Size table for Revit Cargo 2 TF Motorcycle Jeans:

How to measure your height:

Related products

Reviews

Log in