Oxford Hinterland 2.0 Waterproof Motorcycle Textile Jacket

The Oxford Hinterland 2.0 Waterproof Motorcycle Textile Jacket is made for adventure riders with a sporty spirit who expect the best from their gear in any weather. At its heart is the three-layer Dry2Dry™ laminate, made of a durable 500D nylon outer shell, a waterproof breathable membrane and a tricot lining. It keeps you reliably dry in the rain. 4 ventilation zones, including the MAXFLOW™ mesh panel under the front zip, provide airflow. On cold days, simply add the removable thermal liner. The jacket complies with Protection Class AA (EN 17092-3:2020). Level 2 shoulder and elbow protectors and external shoulder sliders give you a high level of protection on every tour.

Features:

Level 2 shoulder and elbow protectors
two-position height-adjustable elbow protectors
pocket for back protector
external TPU shoulder sliders
three-layer Dry2Dry™ laminate of 500D nylon outer shell, waterproof breathable membrane and tricot lining
water-repellent finish, produced without PFAS
removable thermal liner
4 ventilation zones with water-resistant zips on the forearms and upper back, plus MAXFLOW™ mesh panel under the front zip
half placket folds back and fastens open magnetically, one-hand operation
water-resistant YKK® VISLON® AQUAGUARD® front zip
water-resistant zips on all exposed openings
stretch panels at the upper back
hook-and-loop adjustment at upper arms, waist and cuffs
drawcord-adjustable hem
collar with drawcord and Eyelok eyelets, rolled neoprene collar edge
dropped rear hem
long and short YKK® connection zipper to attach the matching pants
360° reflective prints for better visibility at night
2 large expandable side pockets with water-resistant zips, 1 rear pocket with side zip, 2 mesh inner pockets, 1 zipped inner pocket

Specifications:

Protective clothing for motorcycle use, Protection Class AA (EN 17092-3:2020)
Shoulder protectors (EN1621-1) (included)
Elbow protectors (EN1621-1) (included)
Back protector (EN1621-2) (pocket only, not included)
Waterproof rating: 10,000 mm
Breathability: 10,000 g/m²/24 h

Contents:

1 x Oxford Hinterland 2.0 Waterproof Motorcycle Textile Jacket
2 x shoulder protectors
2 x elbow protectors

Color:	black/beige/orange
Size:	L
Tops Type:	Jackets
Material type:	Polyester
Features:	3-layer laminate, Connecting zipper, Elbow protectors included, Shoulder protectors included, Waterproof, removable inner lining
Gender:	Men
Material:	Textile
Season:	All-weather
Closure type:	Zipper closure
Application area:	Enduro / Adventure
Protection class (certification):	Level 2, Protection class AA
Material composition:	Outer shell: 100% polyamide; Stretch panels: 96% polyamide, 4% elastane; Lining: 100% polyester; Removable lining: 100% polyester; Liner trim: 100% polyamide; Liner stretch panels: 85% polyester, 15% elastane

Show more Show less

Size table

Size table for Oxford Hinterland 2.0 waterproof Motorcycle Textile Jacket:

Measurements in:

inch

Size	EU-Size	Chest (cm)	Waist (cm)
XS	44	86-91	71-76
S	46	91-97	76-81
M	48	97-102	81-86
L	50	102-107	86-91
XL	52	107-114	91-99
2XL	54	114-122	99-107
3XL	56	122-129	107-114
4XL	58	129-137	114-122
5XL	60	137-144	122-129

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Reviews

0 out of 0 ratings

Rate this product!

Share your experiences with other customers.

Log in

Your email address

Your password

Display reviews only in the current language.

No reviews found. Share your experiences with others.

Oxford Hinterland 2.0 waterproof Motorcycle Textile Jacket black/beige/orange

Size table for Oxford Hinterland 2.0 waterproof Motorcycle Textile Jacket:

How to measure your height:

Reviews

Log in