£64.68
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
With the micro S DF Dark, the micro series shines in a new format and opens up completely new design options for motorcycles! Optically
the drastic size reduction and the strongly tinted glass of the indicator with integrated rear and brake light virtually disappear three components at once.
In addition, the 3in1 combination offers an optimal possibility of weight reduction on the motorcycle.
The characteristic double rear lights based on two high-power LEDs and the proven Kellermann HighPower LED technology(2) cannot be overlooked in road traffic.
Suitable for all types of motorcycles(1).
(1)U.U. Electronic accessories are required to regulate the flashing frequency.
(2)Combination of the IC controlled Longlife Protection Guard circuit with high-power LEDs of the latest design.
ECE-tested for rear
Replace existing rear/brake light and indicators
Sensational new rear optics
EXtranz - Extreme Optical Transparency Technology
Kellermann HighPower LED Technology
Longlife Protection Guard, IC controlled, 330 kHz clocked
High-quality metal housing
Suitable for 12 Volt DC wiring systems
With M5 x 0.5 x 6.5 mm mounting thread
Design protected throughout Europe
| Color: | black |
|---|---|
| Thread diameter: | M5 |
| Glass: | Tinted |
Size table for Kellermann Rear, brake light, turn signal unit Micro S DF Dark, black, tinted:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.






















