HIGHSIDER CNC button CLASSIC, chrome, 7/8 and 1 inch handlebars
£29.86
We’ll remind you
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Description
HIGHSIDER CNC push button CLASSIC, Suitable for 7/8 and 1 inch handlebars
CNC milled switch with two push buttons. Universally applicable for controlling load relays, switching various modes on tachos, etc.
connections:
Button A : green and red (from bottom)
Button B : green and brown Green is input signal
Dimensions:
Width: xx mm
Depth: xx mm
Button Ø: 4,5 mm
Rubber: 75 mm x 0,3 mm
Anbus screws: M3x 5 mm
Cable length 570 mm
Scope of supply:
1x Button
1x Rubber
2x Screws
Note: NOT for currents above 0.05 amps. So at 12 Volt max. 0.6 Watt.
CNC milled switch with two push buttons. Universally applicable for controlling load relays, switching various modes on tachos, etc.
connections:
Button A : green and red (from bottom)
Button B : green and brown Green is input signal
Dimensions:
Width: xx mm
Depth: xx mm
Button Ø: 4,5 mm
Rubber: 75 mm x 0,3 mm
Anbus screws: M3x 5 mm
Cable length 570 mm
Scope of supply:
1x Button
1x Rubber
2x Screws
Note: NOT for currents above 0.05 amps. So at 12 Volt max. 0.6 Watt.
| Assembly instructions: | Download |
| Color: | Chrome |
|---|---|
| Execution: | Two buttons |
| Thread diameter: | M3 |
