Skip to main content Skip to search Skip to main navigation
100-day return policy
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
SW-Motech Engine guard - Silver. Honda CRF 1000 L Africa Twin (15-19).
Description

Engine guard

The particularly sturdy design of the engine guard also offers the best possible protection of the valuable components offroad thanks to a wall thickness of five millimeters on the underbody and a particularly large protected area. An additional contact point on the frame, an innovation from SW-MOTECH, distributes the forces acting upon ground contact not only onto the mounting points but also to the steel frame of the Africa Twin.

  • To replace the original engine guard from Honda with a wall thickness of 2.5 millimeters
  • Protects underbody and parts of manifold and exhaust against rocks and collision
  • Robust due to high-strength aluminium alloy five millimeters thick in the lower area, four millimeters wall thickness on the sides
  • The engine guard by SW-MOTECH is distinguished by a particularly long and laterally raised outline and thus has a particularly large protective surface
  • In contrast to the much smaller original engine guard this also protects parts of the manifold and the exhaust
  • Elements made of 8 mm thick hard rubber additionally absorb impact forces and distribute them onto all contact points
  • Two cutouts on the bottom allow access to both oil drain plugs - removal of the engine guard is therefore not necessary in order to drain the engine oil
  • Cutouts on the sides provide ventilation, weight reduction and emphasize the look of the bike
  • Compatible with original side stand from Honda or the centerstand from SW-MOTECH (see accessories)
  • Compatible with all equipment variants of the Honda CRF 1000L Africa Twin (Standard / ABS / DCT), except DCT version with gear lever

Included in delivery

  • 1 x Engine guard
  • Mounting instructions
  • Mounting material

Details

  • Material: Aluminum
  • Material strength: 0,50 cm / 0.20 in
  • Surface: brushed
  • Color: silver
  • Total Weight: appr. 3,5 kg / appr. 7.7 lb

Note

  • The engine guard is supplemented by the crash bar and the engine guard extension mounted on the SW-MOTECH centerstand

Incompatible with

  • Not compatible with DCT version with gear lever
Assembly instructions: Download

Size table for SW-Motech Engine guard - Silver. Honda CRF 1000 L Africa Twin (15-19).:

Measurements in:
cm
EU-Size US-Size Foot Length (cm)
33 1 20.3
34 2 21.1
35 2.5 22
36 3 22.4
37 4 23.2
38 5 24
39 5.5 24.5
39.5 5.5 24.7
40 6 24.9
41 7 25.7

How to measure your height:

Sizing Info
1 Foot length

Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.

2 Foot width

Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.

This product is suitable for the following motorcycles:
HONDA
  • CRF 1000 L AFRICA TWIN (SD04) (2017 - 2019)
  • CRF 1000 L AFRICA TWIN (SD04) (2015 - 2017)

Reviews

0 out of 0 ratings

Average rating of 0 out of 5 stars

Rate this product!

Share your experiences with other customers.


de-DE fr-FR fr it-IT nl-NL de-CH de-AT fr-CH it-CH cs-CZ da-DK fi-FI no-NO pl-PL fr-BE nl-BE en-US ja-JP ko-KR pt-PT pt de-LU en-IE en-GB ru-RU es-ES es bg-BG en ro-RO sv-SE en-CA fr-CA en-AU en-AE hr-HR el-GR hu-HU lv-LV sk-SK sl-SI zh-CN zh zh-TW