€80.00
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Bar back
If you're having trouble reaching your handlebars comfortably, consider using a bar back. Our sturdy backs made from aluminum shift the handlebar upward and to the back. For the rider, that can mean a more relaxed, back-friendly seating position, along with better control of the bike. The maximum displacement for your motorcycle can be found in the ABE.
- For Ø 22 mm handlebars with a bore spacing of 32-38 mm
- Displacement of the handlebar 30 mm upwards and 21 mm backwards
- Black powder coating protects against corrosion
- Made of high-strength aluminium alloy
Included in delivery
- 2 x Bar back
- 2 x Handlebar clamps
- Mounting instructions
- Mounting material
Details
- Material: Aluminum
- Surface: powder coated
- Color: black
- Total Weight: appr. 0,4 kg / appr. 0.8 lb
Note
- If you're having trouble comfortably reaching the handlebar, you can choose between different types of universal bar risers, bike-specific variants or bar backs, which not only raise the handlebar but also relocate the rear.
- The length of the Bowden cables and brake lines must be individually verified.
| Assembly instructions: | Download |
Size table for SW-Motech Bar back for Ø 22 mm handlebar - H=30 mm. Shifting by 21 mm. Black.:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 33 | 1 | 20.3 |
| 34 | 2 | 21.1 |
| 35 | 2.5 | 22 |
| 36 | 3 | 22.4 |
| 37 | 4 | 23.2 |
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.