Oxford Mint Corrosion Control 500ml

Oxford Mint Corrosion Control 500ml

Oxford Mint Anti Corrosion is a corrosion protection spray for motorcycles, designed to help protect the bike from existing and new corrosion. Once applied, the product forms a thin protective film that acts as a barrier against moisture, salt and other environmental elements that can cause rust. The easy application makes this protectant especially practical for care, storage and overwintering. During longer periods of storage, the protective film can help maintain the condition of different motorcycle components. For best results, the manufacturer recommends reapplying every 6 months. The fresh mint scent completes the care process.

Features:

• Corrosion protection spray for motorcycle components
• Helps protect against existing and new corrosion
• Forms a thin protective film against moisture and salt
• Ideal for cold storage and overwintering
• Teflon-free and water-free according to manufacturer information
• Available in 500 ml and 750 ml
• Easy application for care and storage
• Helps protect parts from rust-causing environmental elements
• Reapply every 6 months for best results according to manufacturer information
• Fresh mint scent

Important note:

• Do not use on brakes
• Do not use on footings or standing surfaces
• Do not use on live or bare electronic equipment

Hazardous substance labeling:

Signal word:

• Danger

Hazard statements:

• H222 – Extremely flammable aerosol.
• H229 – Pressurised container: May burst if heated.
• H315 – Causes skin irritation.
• H336 – May cause drowsiness or dizziness.
• H411 – Toxic to aquatic life with long lasting effects.
• EUH208 – Contains Benzenesulfonic acid, C10-C16 alkyl derivatives, calcium salt (68584-23-6). May produce an allergic reaction.

Precautionary statements:

• P102 – Keep out of reach of children.
• P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211 – Do not spray on an open flame or other ignition source.
• P251 – Do not pierce or burn, even after use.
• P271 – Use only outdoors or in a well-ventilated area.
• P410+P412 – Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Other hazards:

• Contains no PBT and/or vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII.
• The mixture does not contain substances with endocrine disrupting properties at a concentration equal to or greater than 0.1%.
• Pressurised container: May burst if heated.
• Extremely flammable aerosol.
• May cause drowsiness or dizziness.
• Causes skin irritation.
• Toxic to aquatic life with long lasting effects.
• Not rapidly degradable.
• Avoid release to the environment.
• Water hazard class in Germany: WGK 3 – highly hazardous to water.

Hazardous ingredients:

• PETROLEUM GASES, LIQUEFIED: CAS-No. 68476-85-7; EC-No. 270-704-2; EC Index-No. 649-202-00-6; 30–50%; Flam. Gas 1, H220.
• HYDROCARBONS,C6-C7,N-ALKANES,ISOALKANES,CYCLICS,<5% N-HEXANE: EC-No. 921-024-6; REACH-no. 2119475514-35-XXXX; 10–30%; Flam. Liq. 2, H225; Skin Irrit. 2, H315; STOT SE 3, H336; Asp. Tox. 1, H304; Aquatic Chronic 2, H411.
• HYDROCARBONS, C6, ISOALKANES, <5% N-HEXANE: CAS-No. 64742-49-0; EC-No. 931-254-9; REACH-no. 01-2119484651-34; 1–10%; Flam. Liq. 2, H225; Skin Irrit. 2, H315; STOT SE 3, H336; Asp. Tox. 1, H304; Aquatic Chronic 2, H411.
• Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics: EC-No. 919-857-5; 1–10%; Flam. Liq. 3, H226; STOT SE 3, H336; Asp. Tox. 1, H304.
• SODIUM SULPHONATE: CAS-No. 68608-26-4; EC-No. 271-781-5; 1–10%; Eye Irrit. 2, H319.
• Benzenesulfonic acid, C10-C16 alkyl derivatives, calcium salt: CAS-No. 68584-23-6; EC-No. 271-529-4; <1%; Skin Sens. 1B, H317.