Boyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your Bike's engine cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.
Kit content:
- Impeller kit
- Screw kit
Product features
- Colour: Schwarz
Size table for Boyesen SuperCooler Water Pump Cover + Impeller Kit - Black:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- WR 450 F (2027 - 2027)
- WR 450 F (2025 - 2025)
- WR 450 F (2024 - 2024)
- WR 450 F (2026 - 2026)
- YZ 450 F (2025 - 2025)
- YZ 450 F (2026 - 2026)
- YZ 450 F (2024 - 2024)
- YZ 450 F (2027 - 2027)
- YZ 450 F (2023 - 2023)
- YZ 450 FX (2025 - 2025)
- YZ 450 FX (2024 - 2024)
- YZ 450 FX (2026 - 2026)