$32.18
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Scott Voltage MX/X/Proair Works AntiFog AntiStick Double Replacement Lens
If the glass of your goggles is damaged or worn out, you have the right replacement here.
Features:
- WORKS single lenses are built with factory installed WORKS adjustable tear-off pins and can adapt to fit the WORKS film system
- WORKS lenses are made from polycarbonate material to maintain impact resistance
- 100% UV protection
Specifications:
Compatibility:
- Scott Voltage Motocross Goggles
Contents:
- 1x Scott Voltage MX/X/Proair Works AntiFog AntiStick Double Replacement Lens
| Color: | clear |
|---|---|
| Gender: | Men |
Size table for Scott Voltage MX/X/Proair Works AntiFog AntiStick Double Replacement Lens:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.