Revit Voltiac 3 H2O Ladies Motorcycle Textile Jacket

The previous generations of this jacket are the epitome of affordable, high-performance all-weather touring gear. And when the going gets tough, the Voltiac 3 H2O stays true to its roots. Except now it features PWR|Ripstop fabric in the shoulder, elbow and underarm areas, and a 600-denier polyester shell that fits well and more than holds up to bad weather. With the Voltiac 3 H2O, the weather can never surprise you. The hydratex|Sphere mesh G-liner is waterproof yet breathable. The thermal lining keeps you warm in most seasons, while two sealed ventilation zippers prevent water from entering and can be opened along the entire length of the chest to provide you with fresh air when needed. Warmth, cold, wind, rain or shine - you don't care in the Voltiac. We could talk about motorcycle jackets all day, and we often do. But what matters most are the people who wear them. There's no compromise in the design and engineering of an affordable jacket, which is why you can expect the same level of protection and upgrade options as our REV'IT! Jackets top-of-the-line, so expect SEESMART level 1 protectors on the shoulder and elbow, plus a place for an optional SEESOFT level 2 back protector.

Features:

Polyester 600D outer fabric, polyester ripstop with Teflon® coating.
Flexisnap at collar
Drawcord for adjustment at the waist
Adjustment tab at upper arm and cuffs
Adjustment straps at waist
Slip pocket at chest, inside pocket in thermal lining, 2 front storage pockets, 2 handwarmer pockets
Short connecting zipper
V-shaped cover flap at the cuff
Soft collar edge
Two-way snap closure system
Hydratex®|Mesh G-Liner membrane
Removable thermal lining
Air vent at upper back
Zippers at the chest

Specifications:

EN 17092-2:2020, Class A
Prepared for SEESOFT™ back protector EN1621-2:2014 level 2
SEESMART™ shoulder and elbow protectors EN 1621-1:2012 Level 1
Laminated reflectors on the forearms
Laminated reflective material on the chest
Reflective logo on the back

Color:	silver/black
Size:	34
Tops Type:	Jackets
Features:	Waterproof
Gender:	Women
Material:	Textile
Application area:	Touring
Material composition:	100% Polyester

Show more Show less

Size table

Size table for Revit Voltiac 3 H2O Ladies Motorcycle Textile Jacket:

Measurements in:

inch

Size	Chest (cm)	Waist (cm)
34	81 - 85	63 - 67
36	85 - 89	67 - 71
38	89 - 93	71 - 75
40	93 - 97	75 - 79
42	97 - 101	79 - 83
44	101 - 106	83 - 88
46	106 - 112	88 - 94

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Related products

Revit Seesmart RV32 Elbow Hip Protectors

$28.44

Subscription

(1)

Revit Seesmart RV31 Ellbow Knee Shoulder Protection

$31.15

Subscription

Complementary products

-67%

FC-Moto Hump 2.0 Motorcycle Backpack

$31.03 $94.79

Subscription

(393)

Reviews

2 out of 2 ratings

Rate this product!

Share your experiences with other customers.

Log in

Your email address

Your password

Display reviews only in the current language.

Sorted by

2 reviews

8 December 2025 02:05

Prachtig

Veel te klein.

14 November 2023 22:25

Qualidade otima

Muito bem feito, muito quente, otima qualidade. Unico problema: fica apertado com o blousão interior de inverno.... Talvez melhor encomendar o tamanho superior se é para utilisar no inverno... E sempre o problema do transportador DHL que não fonciona bem na minha zona e demorra muito mais que o previsto, como sempre....