Name: Revit Sand 4 H2O Motorcycle Textile Jacket
Brand: Revit
SKU: 230907026
Price: 542.04 CAD
Availability: OutOfStock
Rating: 4.9 (10 reviews)

Description

Revit Sand 4 H2O Motorcycle Textile Jacket

The Sand 4 H2O jacket can take motorcyclists almost anywhere in style and total comfort. The tough yet lightweight abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips and is designed to provide excellent freedom of movement for the most demanding and technical situations. For maximum impact protection, the Sand 4 H2O includes the award-winning, industry-leading SEEFLEX™ Level 2 protectors at the shoulders and elbows. It also comes prepared for the optional and equally impressive SEESOFT™ Level 2 insert back protector. Every layer that’s included is removable and separately wearable, from the waterproof hydratex® membrane to the insulated winter lining. Multiple adjustment straps and tabs on the arms, and variable height adjustment straps at the waist will ensure the perfect fit to every body with or without the liners installed. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, and 2 exhaust vent zippers around back. The 2 front pockets, big rear pocket, and 2 inner pockets provide ample storage space so you can bring all the essentials along for the ride and keep them close. The back pocket is even large enough to store the liners when not in use.

Features:

3D air mesh
Polyester ripstop
Detachable thermal liner
Detachable hydratex®|3L
Laminated reflection
Tour fit
Adjustable elbow protection
Adjustment drawcord and strap
Adjustment tabs
Flexisnap
Variable height adjustment straps
Ventilation panels
Long connection zipper
Prepared for Segur neck brace
Prepared for vest connector NEON
Short connection zipper at detachable waterproof liner
Soft edge at collar
Two-way Collar Snap Closure System
Internal pocket within thermal liner
Waterproof stash pockets

Specifications:

Prepared for optional Divided Chest Protector SEESOFT™ Level 1
Prepared for optional SEESOFT™ Level 2 back protector insert Type RV
SEEFLEX™ Level 2 Shoulder and Ellbow protectors
EN 17092-3:2020 AA

Color:	grey/orange
Size:	L
Tops Type:	Jackets
Features:	Removable membrane, Waterproof, removable inner lining
Gender:	Men
Material:	Textile
Season:	Summer, Winter
Application area:	Touring
Material composition:	100% Polyester

Show more Show less

Size table

Size table for Revit Sand 4 H2O Motorcycle Textile Jacket:

Measurements in:

inch

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Product video