Oxford Mint Corrosion Control 750ml

Oxford Mint Corrosion Control 750ml

Oxford Mint Anti Corrosion is an anti-corrosion spray for motorcycles, designed to help protect against existing and new corrosion. It is particularly suitable for caring for and protecting the bike during longer storage periods, such as in the colder months. Once applied, the product forms a thin protective film according to manufacturer information, creating a barrier against moisture, salt and other environmental elements that can cause rust. Application is simple: spray evenly onto a clean, dry bike, wipe away any residual drips and allow it to dry. For best protection, the manufacturer recommends reapplication every 6 months. The product features a fresh mint scent.

Features:

• Anti-corrosion spray for motorcycles
• Helps protect against existing and new corrosion
• Ideal for protection during longer storage according to manufacturer information
• Forms a thin protective layer against moisture and salt
• Easy application on clean and dry surfaces
• Teflon and water free according to manufacturer information
• Fresh mint scent
• Available in 500 ml and 750 ml

How to use

• Shake well before use
• Apply to a clean, dry bike
• Spray evenly over the required areas
• Wipe away any residual drips and allow to dry
• Reapply every 6 months for best protection

Important notes

• Do not use on brakes
• Do not use on foot pegs or foot contact areas
• Do not apply to live or bare electronic equipment

Hazardous substance labeling:

Signal word:

• Danger

Hazard statements:

• H222 – Extremely flammable aerosol.
• H229 – Pressurised container: May burst if heated.
• H315 – Causes skin irritation.
• H336 – May cause drowsiness or dizziness.
• H411 – Toxic to aquatic life with long lasting effects.
• EUH208 – Contains Benzenesulfonic acid, C10-C16 alkyl derivatives, calcium salt (68584-23-6). May produce an allergic reaction.

Precautionary statements:

• P102 – Keep out of reach of children.
• P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211 – Do not spray on an open flame or other ignition source.
• P251 – Do not pierce or burn, even after use.
• P271 – Use only outdoors or in a well-ventilated area.
• P410+P412 – Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Other hazards:

• Contains no PBT and/or vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII.
• The mixture does not contain substances with endocrine disrupting properties at a concentration equal to or greater than 0.1%.
• Pressurised container: May burst if heated.
• Extremely flammable aerosol.
• May cause drowsiness or dizziness.
• Causes skin irritation.
• Toxic to aquatic life with long lasting effects.
• Not rapidly degradable.
• Avoid release to the environment.
• Water hazard class in Germany: WGK 3 – highly hazardous to water.
• Do not re-use empty containers.

Hazardous ingredients:

• PETROLEUM GASES, LIQUEFIED: CAS-No. 68476-85-7; EC-No. 270-704-2; EC Index-No. 649-202-00-6; 30–50%; Flam. Gas 1, H220.
• HYDROCARBONS,C6-C7,N-ALKANES,ISOALKANES,CYCLICS,<5% N-HEXANE: EC-No. 921-024-6; REACH-no. 2119475514-35-XXXX; 10–30%; Flam. Liq. 2, H225; Skin Irrit. 2, H315; STOT SE 3, H336; Asp. Tox. 1, H304; Aquatic Chronic 2, H411.
• HYDROCARBONS, C6, ISOALKANES, <5% N-HEXANE: CAS-No. 64742-49-0; EC-No. 931-254-9; REACH-no. 01-2119484651-34; 1–10%; Flam. Liq. 2, H225; Skin Irrit. 2, H315; STOT SE 3, H336; Asp. Tox. 1, H304; Aquatic Chronic 2, H411.
• Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics: EC-No. 919-857-5; 1–10%; Flam. Liq. 3, H226; STOT SE 3, H336; Asp. Tox. 1, H304.
• SODIUM SULPHONATE: CAS-No. 68608-26-4; EC-No. 271-781-5; 1–10%; Eye Irrit. 2, H319.
• Benzenesulfonic acid, C10-C16 alkyl derivatives, calcium salt: CAS-No. 68584-23-6; EC-No. 271-529-4; <1%; Skin Sens. 1B, H317.