FEHLING Z-Lenker 1 1/4 Zoll Low, 3LL, MK, chrom
$593.90
The product is currently unavailable, but we will be happy to notify you by e-mail
We’ll remind you
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Description
Z handlebar Hollister Style LOW for chopper and cruiser of the premium brand FEHLING
High quality handlebar, top processed. The optimized seating position, coupled with good steering behavior, whether on highways at high speed or on winding roads provide high driving pleasure and good guidance of the machine.
- With notch for electric cable (also for all HD models from Bj. 82)
- 3-hole internal cable guide
- Tube Ø 1 3/16 inch (30 mm) with stepped handle ends on Ø 1 inch (25.4 mm) over a length of 200 mm
- 1 inch Ø also in the clamping area. Therefore also suitable for motorcycles with 1 inch intake
- With parts certificate according to § 19 para. 3
- Identifier: HZHD1
3 hole internal cable guide:
- Each 1 slot 10 x 20 mm in the cable notch in the area of the handles
- 1 x slot 10 x 20 mm centered between the clamping points
Dimensions:
a Width: 870 mm
b Height: 120 mm
c Depth: 120 mm
d Height lower edge handlebar end: 90 mm
e Clamping range: 305 mm
f = 165 mm
Scope of delivery: 1 piece
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
High quality handlebar, top processed. The optimized seating position, coupled with good steering behavior, whether on highways at high speed or on winding roads provide high driving pleasure and good guidance of the machine.
- With notch for electric cable (also for all HD models from Bj. 82)
- 3-hole internal cable guide
- Tube Ø 1 3/16 inch (30 mm) with stepped handle ends on Ø 1 inch (25.4 mm) over a length of 200 mm
- 1 inch Ø also in the clamping area. Therefore also suitable for motorcycles with 1 inch intake
- With parts certificate according to § 19 para. 3
- Identifier: HZHD1
3 hole internal cable guide:
- Each 1 slot 10 x 20 mm in the cable notch in the area of the handles
- 1 x slot 10 x 20 mm centered between the clamping points
Dimensions:
a Width: 870 mm
b Height: 120 mm
c Depth: 120 mm
d Height lower edge handlebar end: 90 mm
e Clamping range: 305 mm
f = 165 mm
Scope of delivery: 1 piece
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
| ABE: | Download |
