FEHLING FAT FLYER BAR für E Gas 1 1/4 Zoll, 3LL
$380.72
The product is currently unavailable, but we will be happy to notify you by e-mail
We’ll remind you
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Description
FLYER-FAT-BAR
handlebar for H-D E-Gas handle (throttle by wire) for chopper and cruiser of the premium brand FEHLING
High quality handlebar, top processed. The optimized seating position, coupled with good steering behavior, whether on highways at high speed or on winding roads provide high driving pleasure and good guidance of the machine.
- Fits Harly-Davidson models from Bj. 2008
- Tube Ø 1 1/4 inch (31.75 mm), with stepped handle ends on Ø 1 inch (25.4 mm) over a length of about 204 mm
- 1 1/4 inch Ø also in the clamping area. Therefore, on motorcycles with 1 inch recording only with suitable risers mountable
- 3-hole internal cable guide
- With parts approval in accordance with § 19 para. 3
- Identifier: FD10HDF
3 hole version for internal cable routing:
- Each 1 slotted hole 10 x 20 mm in the cable notch in the area of the handles
- 1 x centered between the clamping points
Dimensions:
a Width = 870 mm
b Height = 65 mm
c Depth = 180 mm
d Height lower edge of handlebar end = 75 mm
e Clamping area outside = 175 mm
Scope of delivery: 1 piece
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
handlebar for H-D E-Gas handle (throttle by wire) for chopper and cruiser of the premium brand FEHLING
High quality handlebar, top processed. The optimized seating position, coupled with good steering behavior, whether on highways at high speed or on winding roads provide high driving pleasure and good guidance of the machine.
- Fits Harly-Davidson models from Bj. 2008
- Tube Ø 1 1/4 inch (31.75 mm), with stepped handle ends on Ø 1 inch (25.4 mm) over a length of about 204 mm
- 1 1/4 inch Ø also in the clamping area. Therefore, on motorcycles with 1 inch recording only with suitable risers mountable
- 3-hole internal cable guide
- With parts approval in accordance with § 19 para. 3
- Identifier: FD10HDF
3 hole version for internal cable routing:
- Each 1 slotted hole 10 x 20 mm in the cable notch in the area of the handles
- 1 x centered between the clamping points
Dimensions:
a Width = 870 mm
b Height = 65 mm
c Depth = 180 mm
d Height lower edge of handlebar end = 75 mm
e Clamping area outside = 175 mm
Scope of delivery: 1 piece
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
| ABE: | Download |