FEHLING FAT APE HANGER für E Gas 1 1/4 Zoll, H 40cm, 3LL
$501.33
The product is currently unavailable, but we will be happy to notify you by e-mail
We’ll remind you
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Description
Handlebar FAT-APE Hanger for E-Gas handle (throttle by wire) 1 1/4 inch, H 40
Fits Harley-Davidson model from 2008
Classic and shapely handlebar of the premium brand FEHLING
High quality handlebar, top processed and great shaped. The optimized seating position, coupled with good steering behavior, whether on highways at high speed or on winding roads provide high driving pleasure and good guidance of the machine.
- 1 1/4 inch also in the clamping area.
- On motorcycles with 1 inch recording only with matching risers mountable.
- At the ends of the handles set off to 1 inch (25.4 mm)
- 3-hole internal cable routing
- Color: Black or chrome
- With parts approval in accordance with § 19 para. 3
3 hole internal cable guide:
- Each 1 slot 13 x 30 mm in the cable notch in the area of the handles
- 1 slot 13 x 40 mm centered in the area of the clamping
Dimensions:
a = Width: 950 mm
b = Height: 400 mm
c = Depth: 195 mm
d = Lower edge handlebar: 350 mm
e = Center down: 310 mm
Tube Ø: 1 1/4 inch (31.75 mm)
Handlebar ends 1 inch (25.4 mm)
Scope of delivery: 1 piece
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
Fits Harley-Davidson model from 2008
Classic and shapely handlebar of the premium brand FEHLING
High quality handlebar, top processed and great shaped. The optimized seating position, coupled with good steering behavior, whether on highways at high speed or on winding roads provide high driving pleasure and good guidance of the machine.
- 1 1/4 inch also in the clamping area.
- On motorcycles with 1 inch recording only with matching risers mountable.
- At the ends of the handles set off to 1 inch (25.4 mm)
- 3-hole internal cable routing
- Color: Black or chrome
- With parts approval in accordance with § 19 para. 3
3 hole internal cable guide:
- Each 1 slot 13 x 30 mm in the cable notch in the area of the handles
- 1 slot 13 x 40 mm centered in the area of the clamping
Dimensions:
a = Width: 950 mm
b = Height: 400 mm
c = Depth: 195 mm
d = Lower edge handlebar: 350 mm
e = Center down: 310 mm
Tube Ø: 1 1/4 inch (31.75 mm)
Handlebar ends 1 inch (25.4 mm)
Scope of delivery: 1 piece
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
| ABE: | Download |