FEHLING FAT APE HANGER 1 1/4 Zoll, H 40cm, 3LL, MK
$428.15
The product is currently unavailable, but we will be happy to notify you by e-mail
We’ll remind you
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Description
APE Hanger FAT-BAR
- Fits Harly-Davidson models from Bj. 2008
- Tube Ø 1 1/4 inch (31.75 mm), with stepped handle ends on Ø 1 inch (25.4 mm) over a length of about 204 mm
- 1 1/4 inch Ø also in the clamping area. Therefore, on motorcycles with 1 inch mount only mountable with matching risers.
- With notch for the electric cables (for all HD from Bj. 82)
- 3-hole cable guide
- With parts certificate according to § 19 Abs. 3
- Identifier: AH1HDF
3 hole internal cable guide:
- Each 1 slot 13 x 30 mm in the cable notch in the area of the handles
- 1 slot 13 x 40 mm centered in the area of the clamping
Dimensions:
a Width: 950 mm
b Height: 400 mm
c Depth: 195 mm
d Height lower edge handlebar end: 350 mm
e Clamping area: 310 mm
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
- Fits Harly-Davidson models from Bj. 2008
- Tube Ø 1 1/4 inch (31.75 mm), with stepped handle ends on Ø 1 inch (25.4 mm) over a length of about 204 mm
- 1 1/4 inch Ø also in the clamping area. Therefore, on motorcycles with 1 inch mount only mountable with matching risers.
- With notch for the electric cables (for all HD from Bj. 82)
- 3-hole cable guide
- With parts certificate according to § 19 Abs. 3
- Identifier: AH1HDF
3 hole internal cable guide:
- Each 1 slot 13 x 30 mm in the cable notch in the area of the handles
- 1 slot 13 x 40 mm centered in the area of the clamping
Dimensions:
a Width: 950 mm
b Height: 400 mm
c Depth: 195 mm
d Height lower edge handlebar end: 350 mm
e Clamping area: 310 mm
Note:
Accessory handlebars are supplied without holes for locking the switch units, as these are positioned differently depending on the motorcycle model.
The drilling of the handlebar is allowed. To do this, align the new handlebar on the vehicle. Now mount the switch units for testing and note the clearance to the tank at full steering angle.
We recommend to use the drilling template for a good result.
| ABE: | Download |