Whatever the level of tuning of your machine, you will find the Athena cylinder kit that suits you. Standard or big bore, these complete kits provide you performance and reliability. You will find below some of the technical solutions adopted by these high quality products:
- Aluminum cylinder nickel-carbide treated
- Special design increasing cooling liquid volume
- High performance exhaust valves
- Bronze dome head
- Forged piston, skirts coated with molybdenum disulfide treatment
- Spare Parts : Piston 9478DA - Top engine gasket : 604448
Delivered with piston, piston rings, circlips, axis, seal and in some cases, cylinder head and exhaust valves. Pistons, rings and gaskets are also available as spare parts.
Product features
- Diameter Ø (mm): 95
Size table for Athena S.p.A. Cylinder Kit - Ø95mm Yamaha:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 33 | 1 | 20.3 |
| 34 | 2 | 21.1 |
| 35 | 2.5 | 22 |
| 36 | 3 | 22.4 |
| 37 | 4 | 23.2 |
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- WR 450 F (CJ04) (2004 - 2004)
- WR 450 F (CJ04) (2003 - 2003)
- WR 450 F (CJ07) (2005 - 2005)
- WR 450 F (CJ09) (2006 - 2006)
- YZ 450 F (CJ03) (2003 - 2003)
- YZ 450 F (CJ05) (2004 - 2004)
- YZ 450 F (CJ06) (2005 - 2005)