$15.72
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
Thanks to their patented conception and their high quality raw materials, Twin Air filters warrant the best performance and protection for your motorcycle. That’s why EO manufacturers and the best riders of the world choose Twin Air.
Replacement fire resistant air filter for the kit 799841
- Coarse open-pore foam catches airborne dirt, grime and sand
- Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage
- Third layer fire resistant foam laminated to the filter that allows to remove the stock backfire screen
- Exclusively developed adhesive ensures glue seams will not break down
- Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage
- Fused outer and inner elements prevent dirt and grime from being lodged between layers, unlike Twin Air, this can be a problem with inferior two-piece designs.
- Trapped particles can restrict airflow. And if dirt works its way into your engine, a pinhead-sized granule will gouge your cylinder, piston and rings like a bullet
Size table for TWIN AIR Air Filter Fire Resistant - 155510FR:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.