$48.33
Please enter your email address so that we can notify you as soon as the item is available again in your desired size.
with ABE
developed for Crosser, Enduros and ATV/Quads
sinter metal pad for front and rear brakes
highmaterial load capacity for extreme operating conditions
very good durability even with sand and mud
excellent combination with all TRW and original brake discs
environmentally friendly and asbestos-free material
TRW-Lucas brake pads are available for over 3.000 motorcycle models! The parts catalogue contains proven friction materials with the recommendedAssignments for vehicles from 1970 up to brand new models.
- 12 different lining mixtures, 6 of them with ABE.
- Organic, sintered metal and carbon-containing lining materials.
- The KBA-No.on the back plate is guaranteed by the ABE.
- All covering materials are free of asbestos and heavy metals.
- The ABE coverings have a long durability and an excellentWet braking performance.
- Good compatibility with original or TRW-Lucas brake discs.
- The original mounting parts or accessories such as plates etc. can be reused.
- WithFor the selection of the pad quality please refer to the corresponding description.
- TRW-Lucas disc brake pads have been tested by many trade magazines and judged as excellent.
| Execution: | Sintered |
|---|
Size table for TRW Lucas TRW Lucas MCB648SI Sinter Offroad brake pad:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.